Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Quadro V6 2D front fixing clip is a dedicated front fixing clip set for use with Hettich Quadro Silent System drawer slides, so it secures the drawer front directly to the slide hardware where that system is specified. This front fixing clip set is designed for the Hettich Quadro NEW Version V6 IW21 series slides only, which means it matches the slide geometry and locking points on that specific series. The clip is for 5/8 inch, or 16 mm, drawer material thickness, letting you match standard 16 mm drawer sides during fabrication. Integrated height adjustment built into the clip supports front panel adjustment without tools, so fit-up and fine tuning can be done right at the cabinet. Side adjustment up to plus or minus 2 mm lets you shift the drawer front sideways on the slide interface to straighten gaps. With plus 3 mm height adjustment, the clip lets you raise the front to align with neighboring fronts.
The front fixing clip set for use with Hettich Quadro Silent System drawer slides connects directly to the NEW Version V6 IW21 series slides, so the mounting points on the clip and slide work together as a system. For 5/8 inch, or 16 mm, drawer material thickness, the clip sits correctly on that edge dimension, which helps keep the drawer front square to the box sides. Side adjustment up to plus or minus 2 mm is built into the design, allowing lateral movement of the attached front to trim the gap to adjacent fronts. With plus 3 mm tool-less height adjustment, vertical alignment of multiple drawer fronts can be refined from the front of the cabinet. Installation is recommended with two number 6 by 5/8 inch flat head screws per clip, giving a defined screw size and length for fastening through the clip into the drawer material.
This front fixing clip set is for use with Hettich Quadro Silent System drawer slides, so it is applied wherever that concealed slide system is specified on drawer boxes. The design is for the Hettich Quadro NEW Version V6 IW21 series slides only, which focuses its application on installations using that particular V6 IW21 runner generation. For 5/8 inch, or 16 mm, drawer material thickness, the clip engages along the edge of that material size, supporting drawer boxes built from 16 mm stock in kitchen, bath, or storage cabinetry that use this thickness. The minimum drawer inside width of 5-1/8 inches, or 130 mm, sets a lower limit for narrow drawers in which the clip can be used, guiding layout decisions when designing very small internal widths. Sold in a pair, with one front fixing clip left and one right each, the set is configured to serve one drawer that has a left and right slide position matched to the Quadro V6 IW21 series.
The clip features integrated height adjustment for front panel adjustment with no tools, so once the drawer is hung on the Hettich Quadro Silent System, the front can be raised without loosening fasteners. With plus 3 mm tool-less height adjustment, the installer can bring the drawer front edge into line with adjacent fronts that sit slightly higher, using the clip mechanism on the V6 IW21 series interface. Side adjustment up to plus or minus 2 mm allows the front to move laterally on the clip relative to the slide, which helps adjust the left and right reveals for even gaps. Because the adjustment is built into the front fixing clip itself, these changes are made at the drawer front connection point, simplifying fine-tuning when working inside finished cabinet openings. For 5/8 inch, or 16 mm, drawer material thickness, the adjustment range operates while the front remains properly supported on that material size, helping maintain a square presentation as reveals are tuned.
The front fixing clip set is for use with Hettich Quadro Silent System drawer slides and is designed for the Hettich Quadro NEW Version V6 IW21 series slides only, so it matches that specific runner system.
The front fixing clip is for 5/8 inch, or 16 mm, drawer material thickness, so it aligns with drawer boxes built from 16 mm sides.
The clip offers side adjustment up to plus or minus 2 mm, allowing the drawer front to shift sideways for fine-tuning left and right reveals.
The front fixing clip features plus 3 mm tool-less height adjustment, which lets the installer raise the drawer front to match adjacent fronts.
The specified minimum drawer inside width is 5-1/8 inches, or 130 mm, which defines the narrowest internal drawer width suitable for this clip.
Installation is recommended with two number 6 by 5/8 inch flat head screws per clip, providing defined fastener sizing for securing the clip.
This Quadro V6 2D front fixing clip set is specified for use with Hettich Quadro Silent System drawer slides and is designed for the NEW Version V6 IW21 series, so it suits projects built around that runner line. Its design for 5/8 inch, or 16 mm, drawer material thickness aligns with drawer boxes using that common side dimension. Integrated height adjustment and side adjustment up to plus or minus 2 mm provide practical front panel alignment in the finished cabinet opening. With a minimum drawer inside width of 5-1/8 inches, or 130 mm, plus a defined screw recommendation, the clip gives clear parameters for planning drawer sizes and fastening while working with this Hettich system.
Sold In: 1 Set