Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
The Hettich Quadro V6 2D Top Mount Front Fixing Clip secures an undermount drawer front to its Quadro slides and lets you fine-tune the front's position after installation — in height and side-to-side — without removing the drawer. Supplied as a handed pair (left and right), it is made for drawer boxes with 5/8 in (16mm) sides.
Getting a drawer front perfectly aligned — level, centered, and gapped evenly with its neighbors — is where installs lose time. This clip's 2D adjustment handles both the height and side axes without pulling the drawer out. After snapping the clips onto the Quadro slides and loading the drawer box, small turns of the adjustment points move the front up to 3mm in height and 2mm left or right. For a multi-drawer column, that means each front can be independently tuned to a consistent reveal without disturbing the ones above or below it. The top-mount geometry keeps the clip accessible from inside the drawer without removing the box.
The clips are molded plastic — the standard material in Hettich's Quadro accessory program for this component type. Plastic keeps weight off the front and resists the moisture swings common inside kitchen base cabinets. There is no finish to chip or corrode. The clips are sized to the 5/8 in drawer side specification; the thicker 3/4 in (19mm) version is a separate SKU and the two are not interchangeable, because the engagement geometry and clamping range differ between side thicknesses.
Cabinet shops running Hettich Quadro V6 undermount slides on 5/8 in drawer boxes will find these clips the right front-attachment solution for production work, replacement, and warranty service alike. Kitchen installers doing final adjustments on site benefit from the on-drawer tuning — height and side correction happen in place, without full drawer removal. For residential or commercial projects where the Quadro system is already specified, these clips complete the installation cleanly. They suit any application where Quadro V6 slides are installed and the drawer box is built to 16mm side thickness.
Only the Quadro series. Hettich's front fixing clips are engineered per slide system; this clip's engagement profile is specific to Quadro V6 and does not seat correctly on Actro or other Hettich runners.
Height and side — up to 3mm of height correction and plus or minus 2mm of lateral correction. Depth adjustment is not part of this clip's range; if depth tuning is needed, address that at the slide level before attaching the front.
The set includes one left-hand and one right-hand clip — a complete pair for one drawer front. Order one set per drawer.
No. This clip is sized for 5/8 in (16mm) drawer sides. The 3/4 in (19mm) version is a separate item; using the wrong thickness clip will not engage the drawer box correctly.
Typically a small screwdriver is used to turn the adjustment points on this style of clip. The adjustment is made with the drawer in place, so no tools are needed to remove or reinstall the drawer during the process.
A handed pair of Quadro V6 2D top-mount clips — one left, one right — matched to your 5/8 in drawer boxes gives every Quadro drawer the front attachment and on-site adjustability it needs. Keep these on hand when Quadro slides are in the spec, and front alignment becomes a two-minute task rather than a return trip.
Sold In: 1 Set