Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Amerock Urbanite pull 96 mm gives a 3-3/4 in center-to-center mounting layout that matches common cabinet drilling patterns, which helps streamline installs on face frame or frameless doors and drawers. The pull is part of the Urbanite collection, so multiple openings can share the same design across a project. Its 6-1/2 in overall length spans more of the door or drawer front, which helps larger hands get a comfortable grip during daily use. The pull uses a zinc/aluminum material construction, giving a metal feel that suits typical cabinet hardware applications. A polished chrome and satin nickel finish combination provides a mixed-metal look on one part, so the hardware can coordinate with both chrome and nickel fixtures in the same room. The 1/2 in width gives a slim, linear profile, which supports a clean, modern visual line along cabinet fronts. A 1-3/16 in projection stands the handle off the surface, which leaves working finger clearance behind the pull.
The 3-3/4 in (96 mm) center-to-center dimension defines where mounting holes land, which lets installers transfer that spacing directly to drilling jigs or templates. A 1-3/16 in projection sets how far the pull sits off the surface, which affects the feel when grabbing from different angles on upper or base cabinets. The 1/2 in width works with the 6-1/2 in length to determine the visual footprint on the front, which matters when lining multiple pulls across banks of doors or drawers. Base dimensions of 7/16 in length by 1/2 in width at each foot indicate how much flat contact area the pull has on the face, which helps align it square to door edges or drawer fronts during tightening.
This Amerock Urbanite cabinet pull with 3-3/4 in (96 mm) center-to-center spacing suits cabinet and furniture fronts that are already drilled on that standard. The 6-1/2 in overall length works well across typical door rails and common drawer widths, giving enough bar length for a centered hand grip. Its 1-3/16 in projection helps on upper wall cabinets where fingers approach from below, providing depth to hook a hand without contacting the door surface. On base cabinets, the same projection supports a consistent grab feel when reaching down from above. The 1/2 in width and 7/16 in by 1/2 in base dimensions suit face frame and slab fronts, giving a small contact patch that seats cleanly on flat sections of the stile or panel without spilling over narrow rails.
The fixed 96 mm center-to-center spacing on the Urbanite pull allows installers to reuse a single drilling pattern, which speeds up repetitive work when laying out long cabinet runs. The combination of polished chrome and satin nickel finishes on one pull lets designers carry a single part across areas that mix fixture finishes, which reduces part variation while keeping a coordinated look. Zinc/aluminum construction gives a metal body that accepts the specified finishes cleanly, which supports a consistent appearance from pull to pull on the same project. The 6-1/2 in length and 1/2 in width create a predictable proportion, which helps maintain alignment and visual rhythm when multiple pulls are installed in rows. The 1-3/16 in projection and defined base dimensions make it easier to judge clearances to adjacent walls or appliances, which helps avoid interference when doors swing or drawers extend.
The Amerock Urbanite pull has a 3-3/4 in (96 mm) center-to-center dimension, which sets consistent hole spacing for drilling and aligning multiple handles.
The Amerock BP7789626G10 pull measures 6-1/2 in in overall length, which provides a longer gripping surface across cabinet doors and drawers.
This Urbanite cabinet pull has a 1-3/16 in projection, which spaces the handle off the front enough for practical finger clearance during use.
The Urbanite pull uses zinc/aluminum construction, which provides a metal body suited to decorative cabinet hardware applications.
The Amerock Urbanite pull has a polished chrome and satin nickel finish combination, which lets one handle coordinate with both chrome and nickel room fixtures.
Each base on this pull measures 7/16 in long by 1/2 in wide, which defines the contact area used to align the pull on doors and drawers.
The Amerock Urbanite Series 3-3/4 in (96 mm) center-to-center polished chrome/satin nickel pull BP7789626G10 combines standard 96 mm spacing with a 6-1/2 in length, a 1-3/16 in projection, and zinc/aluminum construction, giving cabinet projects a consistent, coordinated handle solution.