Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Amerock Urbanite pull 128mm is a zinc and aluminum handle designed for decorative cabinet and drawer use, so it suits both shop-built installations and residential projects needing consistent styling. The polished chrome and black chrome finish creates a two-tone look that defines the pull visually, which matters when matching modern hardware layouts across a room. The 5-1/16 in (128 mm) center-to-center drilling aligns with a common boring pattern, helping installers reuse existing holes on many replacement jobs. Overall length of 7-13/16 in spreads the visual weight across wider drawer fronts, which helps larger fronts appear proportional. A projection of 1-3/16 in provides hand clearance away from the cabinet face, which supports a solid grip during daily use. The 1/2 in width keeps the profile slim, which is useful where multiple pulls sit close together on narrow faces.
The 5-1/16 in (128 mm) center-to-center drilling defines the primary mounting layout for this pull, so jigs and boring patterns can be set to that distance for repeat runs. Base dimensions of 7/16 in length by 1/2 in width show the footprint at each contact point, which helps installers understand how much surface the pull covers at the fastener locations. The 1/2 in overall width keeps the pull narrow along its length, which can be helpful where hardware needs to clear nearby trim or adjacent fronts. Projection of 1-3/16 in establishes how far the handle stands off the face, which supports both finger clearance and consistent alignment with other pulls of similar projection within the same install.
This Amerock Urbanite series pull is categorized under decorative hardware and moldings, handles and pulls, so it suits cabinet and furniture applications needing defined hardware placement. The 5-1/16 in (128 mm) center-to-center layout aligns with cabinet doors and drawers drilled on metric-based spacing, which supports use in kitchens, baths, and casework following that standard. With a 7-13/16 in overall length, the pull spans a noticeable portion of medium to wider fronts, which helps create linear alignment across banks of drawers. The 1-3/16 in projection works with standard cabinet depths, so doors and drawers can open while retaining a clear grip point. The 1/2 in width keeps the profile lean, which is useful on narrower rails or smaller drawer faces that still require a full 128 mm drilling.
The Urbanite pull uses a defined 5-1/16 in (128 mm) center-to-center measurement, which allows installers to build or use boring templates that repeat accurately from cabinet to cabinet. Base dimensions of 7/16 in by 1/2 in at each mounting point indicate the contact area around each fastener location, which helps anticipate coverage over previous hardware marks when doing changeouts. The combination of polished chrome and black chrome finish establishes a consistent two-tone appearance, which supports matching across multiple doors and drawers without finish variation inside this part number. Its zinc and aluminum construction keeps the pull in a metal hardware category, which fits typical expectations on residential and commercial cabinetry that already uses metal hinges and other pulls.
The Amerock Urbanite pull uses a 5-1/16 in (128 mm) center-to-center drilling, which sets the distance between mounting points for doors and drawers.
The BP77812826BCR cabinet pull measures 7-13/16 in in overall length, which helps it span a substantial section of drawer or door fronts.
This zinc aluminum cabinet pull has a projection of 1-3/16 in, which provides hand clearance away from the cabinet face for a comfortable grip.
This Urbanite series pull has a polished chrome and black chrome finish, which creates a two-tone appearance on the cabinet hardware line.
Each mounting point on this pull has base dimensions of 7/16 in length by 1/2 in width, which defines the surface area contacting the cabinet face.
This Amerock Urbanite cabinet pull uses zinc and aluminum construction, placing it within metal decorative hardware for cabinets and drawers.
The Amerock Urbanite series 5-1/16 in (128 mm) center-to-center pull BP77812826BCR pairs a zinc and aluminum body with polished chrome and black chrome finish, giving installers a defined two-tone option. With known length, projection, width, and base dimensions, this handle supports planned drilling patterns and visual alignment on cabinets and drawers. Use these verified measurements and finish details to align this pull with your decorative hardware layout across kitchens, baths, or casework runs.