Amerock Transcendent matte black knob defines this piece as a 1-1/4 inch diameter aluminum knob designed for cabinet and furniture doors or drawers where a compact, consistent pull point is needed. The knob comes from the Amerock Transcendent collection, so its look and proportions match other hardware in that family for visual continuity across a project. The matte black finish gives the aluminum knob a low-sheen appearance that helps conceal fingerprints in regular use spaces. A projection of 7/8 inch sets the hand clearance from the cabinet face, which helps users get a comfortable grip without the knob sticking too far into traffic paths. The 1-1/4 inch width and matching base dimensions provide a stable footprint against the cabinet surface, which helps distribute pull forces across a broader area of wood or composite.
This Amerock Transcendent cabinet knob uses an 8-32 x 1 inch screw interface, so the threaded connection matches a widely used cabinet hardware standard for through-bored doors and drawers. The 1-1/4 inch length from edge to edge sets the footprint, which aligns well with standard 3/4 inch front thicknesses where a single center bore is typical. A 7/8 inch projection defines how far the knob stands off the surface, giving predictable clearance when planning for adjacent doors, drawer stacks, or tight walkways. The square 1-1/4 inch by 1-1/4 inch base dimension provides a clear reference mark when laying out centerlines and edge distances, simplifying repeatable positioning across multiple fronts in a run.
The Amerock Transcendent Series matte black 1-1/4 inch diameter knob suits cabinet and furniture fronts that benefit from a compact, geometric pull with a square base. Its 1-1/4 inch width and matching 1-1/4 inch by 1-1/4 inch base let it sit comfortably on both narrow and wider stiles, which is useful on face-frame cabinets and frameless applications with varied panel sizes. The 7/8 inch projection provides enough stand-off for everyday gripping on kitchen, bath, or shop storage cabinetry where users frequently operate doors and drawers. Because the knob is made from aluminum with a matte black finish, it visually complements other matte black decorative hardware and moldings specified in the same space. The Transcendent collection identity ties this knob into a broader Amerock hardware family, which helps designers and installers coordinate pulls and knobs from a single visual line.
The 1-1/4 inch diameter head and square 1-1/4 inch base give installers fixed reference dimensions, which simplifies jig setup when drilling consistent center points across multiple cabinet fronts. The 7/8 inch projection creates a known offset from the door or drawer face, making it easier to plan for clearances between adjacent fronts so handles do not interfere with each other during operation. The aluminum material keeps weight low at the mounting location, helpful when hardware is installed in multiples across light drawer fronts or thin doors where concentrated mass could otherwise affect alignment. Using the 8-32 x 1 inch screw size means the threaded interface corresponds to common boring practices, so installers can standardize on familiar drill bit sizes and fastener tooling. The matte black finish provides a uniform appearance around the knob perimeter and base, giving clean visual lines against painted, stained, or laminated surfaces where finish contrast is part of the design intent.
The Amerock Transcendent knob has a 1-1/4 inch diameter and a 1-1/4 inch width, providing a compact pull area that suits both cabinet doors and drawers.
The knob projects 7/8 inch from the cabinet surface, giving enough finger clearance for a secure grip while keeping the profile tight to the door or drawer front.
The BP196732MBMB knob has base dimensions of 1-1/4 inch long by 1-1/4 inch wide, creating a square footprint that spreads load around the mounting point.
The knob is made from aluminum with a matte black finish, providing a lightweight construction and a low-sheen dark appearance on cabinet or furniture fronts.
This Amerock Transcendent cabinet knob is designed for use with an 8-32 x 1 inch screw, aligning with a common cabinet hardware thread size and length.
The knob belongs to the Amerock Transcendent collection, so its styling and proportions coordinate with other pieces in the same line for consistent project aesthetics.
The Amerock Transcendent matte black 1-1/4 inch aluminum knob offers defined dimensions and a standard 8-32 x 1 inch mounting interface, giving installers predictable results across cabinet runs. Its 7/8 inch projection and square 1-1/4 inch base work well in layouts where grip comfort and visual alignment matter. For projects built around matte black decorative hardware and moldings, this BP196732MBMB knob ties into the Transcendent collection, supporting a unified hardware look from one Amerock series.