Amerock Transcendent knob describes a 1-1/4 inch diameter cabinet knob from Amerock Corporation that gives doors and drawers a defined pull point, which helps installers deliver consistent operation and alignment from piece to piece across a project. The knob belongs to the Transcendent collection, so it follows a coordinated design language that supports visual continuity when matching other Transcendent hardware in the same space. Its polished nickel finish reflects light as a bright metallic surface, which helps the knob stand out on darker fronts and supports clear hand placement in busy shop or household use. The aluminum material keeps the knob body lightweight, which helps reduce load on the fastening point while still presenting a solid metal touch surface for everyday cabinet use in woodworking and cabinet installations.
The 1-1/4 inch diameter of this Amerock Transcendent knob establishes a familiar cabinet scale, which helps it fit comfortably on standard doors and drawer fronts without overwhelming narrower rails or stiles. Its 7/8 inch projection defines the stand-off distance from the surface, giving fingers enough room to pull while staying close enough to limit interference with nearby doors or interior clearances. The 1-1/4 inch by 1-1/4 inch base dimensions mirror the head size, which helps the knob sit visually centered and distributes force evenly at the fastening point during repeated opening and closing cycles. The specified 8-32 x 1 inch screw size aligns the knob with common cabinet drilling practices, which supports straightforward installation into standard cabinet door and drawer thicknesses used in woodworking shops.
This Amerock Transcendent knob belongs to the Decorative Hardware & Moldings category and the Amerock knob class, which positions it as a visible component on finished cabinetry rather than concealed functional hardware. The 1-1/4 inch diameter and matching 1-1/4 inch base suit typical cabinet doors and drawer fronts, so it can be laid out in rows or grids without appearing oversized or undersized against common face frame and frameless constructions. Its polished nickel finish gives a reflective metallic look, which pairs with other polished nickel elements in kitchens, baths, and built-ins where a coordinated metal tone matters. Because the knob is made from aluminum, it delivers a metal touch surface while keeping overall hardware weight low, which is useful on smaller doors, lighter drawer boxes, or situations where multiple knobs run across wide banks of cabinetry.
The defined 1-1/4 inch length or diameter of the Amerock Transcendent knob allows installers to base drilling layouts on a known knob size, which helps maintain even edge distances and clearances from door and drawer edges across an entire run of cabinets. The 7/8 inch projection creates a predictable stand-off, which lets planners anticipate finger clearance relative to adjacent doors, appliance panels, or side walls before any holes are bored. Matching 1-1/4 inch base dimensions front to back keep the contact footprint square, which helps the knob seat flush against the surface and resist rocking when pulled from the side. The specified 8-32 x 1 inch screw size provides a clear fastening standard, which allows installers to set up drilling and fastening routines around a consistent thread and length during production or jobsite work. The polished nickel finish combined with the Transcendent collection identity means the knob can be specified wherever a coordinated polished nickel Amerock Transcendent hardware theme is required.
The Amerock Transcendent knob has a 1-1/4 inch length or diameter, a 1-1/4 inch width, 1-1/4 inch by 1-1/4 inch base dimensions, and a 7/8 inch projection, which defines its scale on typical cabinet fronts.
The BP196732PNPN knob is made from aluminum with a polished nickel finish, giving a metal touch surface and a bright metallic appearance suitable for decorative cabinetry hardware.
The Amerock Transcendent knob is specified with an 8-32 x 1 inch screw size, which matches common cabinet knob threading for mounting through standard door and drawer thicknesses.
The knob has a 7/8 inch projection, so it extends 7/8 inch from the cabinet face, providing finger clearance for gripping while keeping the profile relatively close to the surface.
The BP196732PNPN knob is part of Amerock's Transcendent collection, which allows it to coordinate visually with other Transcendent series decorative hardware pieces on the same project.
This knob is listed in Decorative Hardware & Moldings under the Amerock knob class, positioning it as a visible cabinet knob for doors and drawers rather than a concealed component.
The Amerock Transcendent knob BP196732PNPN pairs a 1-1/4 inch aluminum body with a polished nickel finish, giving cabinets a defined pull point that matches other polished nickel hardware. Its 7/8 inch projection, 1-1/4 inch base, and 8-32 x 1 inch screw specification provide clear sizing and fastening details, which supports predictable layouts and repeatable installation on doors and drawers across woodworking and cabinet projects.