Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Amerock Calathea 96mm brushed gold pull is a zinc cabinet handle designed with a 3-3/4 in (96 mm) center-to-center layout, which sets consistent drill spacing across cabinet doors and drawers for repeatable layout on multi-unit jobs. The brushed gold finish defines the visual impact of the pull, giving a uniform look wherever the same hardware is used in a kitchen, bath, or built-in project. Its zinc material forms a solid body that supports everyday opening and closing forces in residential cabinetry. The pull length of 4-7/16 in provides finger clearance across the stile, tying the handle size to typical door and drawer front widths. With a projection of 1-1/16 in, the pull stands off the face enough to grip while keeping the hardware close to the cabinet surface for a compact, controlled profile in tight runs.
This Amerock Calathea cabinet pull uses a 3-3/4 in (96 mm) center-to-center pattern, giving a clear reference for drilling and layout on new or refaced cabinets where precise spacing is critical. The 8-32 x 1 in screw size connects directly to the threaded bosses in the zinc body, matching a common cabinet hardware standard so installers can rely on familiar mounting tools and bit sizes. The base dimensions of 1/2 in by 1-1/16 in define the contact patch that seats against the door or drawer front, distributing load across the mounting area and influencing how the pull visually interacts with panel profiles and edge details.
The Amerock Calathea 96mm brushed gold pull, with its 3-3/4 in center-to-center spacing, supports consistent hardware layout across banks of doors and drawers, which is important when aligning handles along long cabinet runs. The 4-7/16 in overall length gives each front a defined hardware span, helping installers position the pull so stile margins and drawer reveals look even from cabinet to cabinet. With a projection of 1-1/16 in, the pull stands off the surface enough for a full finger grip, which is useful on thicker door edges or when working with heavier drawers that see repeated use. The 1-1/16 in width sets the front-facing dimension of the pull, contributing to a substantial visual line that can be matched across upper and lower cabinets for a unified hardware theme. The brushed gold finish fixes the color and sheen of the pull, which lets designers repeat this same tone on every opening to keep the project coordinated.
The 3-3/4 in (96 mm) center-to-center measurement on this Amerock BP100396BGL cabinet pull allows installers to use standard drilling templates, which streamlines repetitive marking and reduces layout variation from cabinet to cabinet. The zinc material ensures the pull body is a single, stable component, so the 8-32 x 1 in screws can tighten into a firm substrate and draw the bases evenly against the door or drawer surface. Base dimensions of 1/2 in length by 1-1/16 in width define a rectangular contact area, which helps the pull register square to the door edge and maintain alignment with neighboring hardware. The 1-1/16 in projection controls how far the pull extends into the room, which supports predictable clearance when doors near walls or appliances. With its brushed gold finish and Calathea-series styling, the pull delivers the same appearance wherever it is used, so replacements and additions match existing hardware visually and dimensionally.
The Amerock Calathea 96mm brushed gold pull uses 3-3/4 in (96 mm) center-to-center screw spacing, which sets the hole layout for drilling doors and drawers.
The Calathea brushed gold cabinet pull has a 1-1/16 in projection, creating consistent hand clearance while keeping the handle close to the cabinet face.
The Amerock BP100396BGL cabinet pull measures 4-7/16 in in overall length, which helps determine visual proportion on doors and drawers.
This Calathea pull is made of zinc with a brushed gold finish, giving a metal body and a defined gold appearance across all installed fronts.
The Amerock Calathea zinc pull is designed for 8-32 x 1 in screws, matching a common cabinet hardware thread for mounting into doors and drawers.
The Calathea brushed gold cabinet pull has a base measuring 1/2 in long by 1-1/16 in wide, setting the contact area against the cabinet surface.
The Amerock Calathea series 3-3/4 in (96 mm) center-to-center brushed gold pull brings a defined set of working dimensions, from its 4-7/16 in length to its 1-1/16 in projection and width. For projects that need consistent 96 mm drilling patterns in a brushed gold finish, this zinc pull from Wurth Baer Supply offers a repeatable hardware choice you can apply across doors and drawers to keep layout, color, and grip characteristics uniform from one cabinet run to the next.