
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Amerock Concentric gunmetal knob is a 1-9/16 inch diameter cabinet knob designed for doors and drawers that need a consistent, repeatable pull point. The Concentric collection identity ties this knob to a coordinated Amerock design family, which helps keep projects visually aligned across multiple openings. The knob uses a zinc construction, which provides a solid feel in hand and supports accurate fastening into the door or drawer front. Its gunmetal finish creates a defined contrast against many cabinet finishes, helping installers visually line up hardware across a bank of cabinets. The 1-9/16 inch length or diameter sets a clear grip area, useful on both narrow and wider fronts where finger access matters. With an Amerock Corporation brand and BP36810GM part number, this knob is easy to specify, reorder, and match to existing layouts in the field.
The Amerock Concentric Series Gunmetal 1-9/16 inch diameter knob uses a 3/4 inch projection, so installers know exactly how far it extends from the cabinet face during layout. This projection helps in planning clearances around opposing doors or drawer fronts. The base dimensions of 3/8 inch length by 3/8 inch width define the footprint where the knob meets the surface, which is important when positioning it on narrow rails or stile edges. An 8-32 x 1 inch screw size is specified, giving a clear thread and length reference for drilling pilot holes and matching to typical cabinet front thicknesses. With these defined dimensions, installers can lay out drilling patterns, centerlines, and spacing that stay consistent across multiple units, supporting a clean, aligned finished run.
The Concentric collection designation identifies this Amerock knob as part of a coordinated decorative hardware line, which helps when a project calls for matching knobs across an entire room or suite. With a 1-9/16 inch diameter, the knob suits standard cabinet doors and many drawer fronts where a single pull point is appropriate. The 3/4 inch projection gives enough stand-off from the surface for fingers to grasp, which is useful on thicker door profiles or fronts with edge details. Its gunmetal finish positions it as a dark metallic option, which can visually complement other gunmetal-finished components on the same cabinets. The zinc material body supports consistent weight and feel from knob to knob, important on multi-opening installations such as kitchens, baths, or built-ins where uniform hardware performance is expected.
The specified 1-9/16 inch length or diameter gives installers a fixed reference for spacing knobs horizontally and vertically, reducing guesswork during layout and helping minimize rework from misaligned hardware. The 3/8 inch by 3/8 inch base size sets a small contact zone, which can be helpful when centering the knob on narrow frame members where space is limited. The 3/4 inch projection is defined, so installers can anticipate how close fronts can pass one another without the knobs colliding, which is critical where doors open toward each other. The 8-32 x 1 inch screw size detail aligns with common cabinet construction, so drilling and threading expectations remain consistent across the job. The Amerock BP36810GM part number uniquely identifies this exact combination of Concentric collection design, gunmetal finish, and dimensions, which streamlines ordering matching replacements or additions later.
The Amerock Concentric Series gunmetal knob has a 1-9/16 inch length or diameter, a 3/4 inch projection, and a 3/8 inch by 3/8 inch base, guiding drilling layout and spacing decisions.
The 3/4 inch projection sets how far the knob stands off the cabinet face, balancing finger clearance with reduced interference between adjacent doors or drawer fronts.
The BP36810GM Concentric knob uses zinc construction, providing a solid, single-body component that supports stable fastening into standard cabinet fronts.
The Amerock Concentric Series BP36810GM knob uses a gunmetal finish, offering a dark metallic appearance that can coordinate with similar gunmetal hardware on the project.
The Amerock BP36810GM knob specifies an 8-32 x 1 inch screw size, giving installers a clear reference for pilot hole preparation and thread compatibility with cabinet fronts.
The Concentric collection label identifies this knob as part of an Amerock design family, helping specifiers select matching knobs across multiple rooms or cabinet runs.
The Amerock Concentric gunmetal knob brings a defined 1-9/16 inch diameter, 3/4 inch projection, and 3/8 inch by 3/8 inch base to cabinet projects, giving installers clear layout data from the start. Its zinc construction and gunmetal finish combine a consistent feel with a specific visual tone that can align with other hardware decisions on the job. With the BP36810GM part number, this knob is straightforward to specify alongside other Amerock components. For cabinet doors and drawers that need a coordinated Concentric collection look with known dimensions, this knob provides a precise, repeatable option.