Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Amerock Concentric matte black pull gives cabinets a defined 5-1/16 in center-to-center grip that sets consistent spacing across doors and drawers, which helps installers keep layouts aligned on longer cabinet runs. The pull belongs to the Concentric Collection, so its styling stays consistent when used across a full kitchen or bank of casework. A matte black finish keeps reflections down on site lighting, which helps the pull read cleanly against both light and dark fronts. The pull is made from zinc, providing a solid feel in the hand while keeping overall piece weight manageable during installation on standard cabinet doors and drawer fronts. A 5-7/16 in overall length provides just enough overhang past the mounting centers for comfortable grasping without crowding tight drawer groupings or narrow face frames on built-ins and bath vanities.
The 128 mm center-to-center layout on this matte black zinc cabinet pull lets installers work directly from metric or imperial plans without conversion, since 5-1/16 in corresponds closely to standard 128 mm drilling patterns. The defined base size of 5/16 in by 1 in gives a clear contact area against the cabinet face, which supports even clamping pressure when tightening fasteners from the back side. With a 7/8 in projection off the door surface, the pull provides enough clearance for fingers while still sitting close to the face, which is useful on narrow walkways or tight galley runs. The 1 in width spreads the load across the front surface, which is helpful on painted or veneered doors where point pressure could telegraph over time.
This Concentric collection cabinet pull with 5-7/16 in overall length works well on typical kitchen and bath fronts where a mid-size handle is preferred, because the length balances most drawer widths and door stile sizes. The 5-1/16 in center-to-center drilling gives enough span to feel substantial on base cabinet drawers while staying compact enough for upper doors. Its 7/8 in projection keeps the pull inside most cabinet profiles, which is useful around appliances or adjacent walls where over-projecting hardware could interfere. With a 1 in wide grip surface, the pull provides secure contact for users opening heavier drawers, which benefits loaded base cabinets and utility storage. The matte black finish can visually tie together modern casework where dark hardware is specified, and it also contrasts cleanly against lighter painted or wood-grain doors. Zinc construction supports a solid feel on frequently used fronts, which matters on doors and drawers that see daily operation.
The 128 mm center-to-center dimension on this Amerock BP36813MB pull pairs with many common cabinet drilling templates, which helps installers maintain straight hardware runs across long banks of doors. When a job mixes doors and drawers, the shared 5-1/16 in drilling pattern allows one layout approach across both, which simplifies boring and reduces layout variation. The defined base footprint of 5/16 in by 1 in at each mounting point concentrates contact in a predictable rectangle, which helps the pull seat flat on raised-panel profiles or on narrow stiles. With a 7/8 in projection, the handle provides room behind the pull for fingers even when used on thicker drawer fronts, which reduces interference from decorative edge profiles. The 1 in width offers a stable grip that helps users control heavier slides, which is useful on wider drawers with substantial contents. The specified 8-32 x 1 in screw size ties directly to standard cabinet hardware threads, which supports straightforward fastening through typical door and drawer thickness ranges.
This Amerock Concentric matte black pull has a 5-1/16 in (128 mm) center-to-center measurement, which sets the exact spacing for boring the two mounting holes on cabinet doors or drawers.
The pull has a 7/8 in projection from the mounting surface, which provides finger clearance behind the handle while keeping the hardware close to the cabinet front in tighter spaces.
The Concentric collection cabinet pull has a 5-7/16 in overall length, a 1 in width, and a base footprint of 5/16 in by 1 in at each mounting point for contact against the cabinet face.
The Amerock BP36813MB pull is made from zinc with a matte black finish, which gives a solid feel in hand and a low-gloss appearance on cabinet doors and drawers.
The 128 mm center-to-center pull works well on standard cabinet doors and drawers, providing a balanced handle size that fits many kitchen, bath, and storage layouts.
This cabinet handle is specified with an 8-32 x 1 in screw size, which matches common cabinet hardware threads and supports straightforward mounting through typical front thicknesses.
The Amerock Concentric matte black zinc cabinet pull with 5-1/16 in (128 mm) center-to-center drilling, 5-7/16 in overall length, and 7/8 in projection offers defined dimensions that support repeatable cabinet layouts. Using this BP36813MB pull wherever a 1 in wide, matte black handle is specified helps keep drilling patterns, grip feel, and visual lines uniform across doors and drawers, which streamlines cabinet hardware work on your next project.