Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Amerock Concentric pull 128mm center to center describes a cabinet pull from Amerock Corporation designed for furniture and cabinet doors and drawers using a 5-1/16 inch (128 mm) hole spacing. This pull is part of the Concentric collection, so it ties into other Concentric pieces on a project for consistent styling across cabinets. The pull is made from zinc, giving it a solid metal construction for everyday cabinet use in shops, kitchens, or built-ins. Its satin nickel finish provides a neutral, low-glare look that coordinates with many hinge and appliance finishes in woodworking jobs. With a length of 5-3/4 inches, it spans standard cabinet fronts without overpowering narrow rails. The stated handle width of 11/16 inch offers enough gripping surface for routine opening and closing. A projection of 15/16 inch sets the pull off the face just under an inch, so fingers can get behind it without needing deep standoffs.
This Amerock Concentric Series pull lists a 5-1/16 inch (128 mm) center-to-center measurement, so the mounting holes are set for the widely used 128 mm spacing in cabinetry layouts. That spacing lets installers line up with existing 128 mm bores or use standard drilling jigs without reworking patterns. The 5-3/4 inch length extends slightly beyond the hole spread, giving a balanced edge distance from each screw to the pull ends on common door sizes. With 15/16 inch projection, the pull keeps the hand clear of door faces and drawer fronts, which is useful on thicker fronts where shallow hardware can feel cramped. The 8-32 x 1 inch screw size and the 5/16 inch by 5/16 inch base dimensions define the connection at each mounting point, supporting consistent seating against flat cabinet faces.
The Amerock Concentric Series 5-1/16 inch center to center satin nickel pull fits cabinets and furniture that follow the 128 mm drilling standard. On new casework, the 5-3/4 inch overall length works across typical kitchen, bath, or shop cabinet fronts that need a mid-sized handle. The satin nickel finish allows this pull to coordinate with other satin nickel decorative hardware and moldings from the same environment, maintaining visual continuity across doors and drawers. Because it is part of Amerock decorative hardware and moldings in the handles and pulls class, it suits projects where the handle doubles as both a working grip and a visible design element. The 11/16 inch width creates a clear bar that stands out on painted, stained, or laminated fronts, so the pull remains easy to locate by feel.
The defined 5-1/16 inch (128 mm) center-to-center spacing on this Amerock BP36831G10 pull supports repetitive drilling with standard cabinet jigs, which is useful when running long banks of doors or drawers. The 15/16 inch projection provides predictable stand-off from the surface, helping installers keep doors from feeling tight at the grip point, even when fronts are thicker or have applied moldings around them. The 5/16 inch by 5/16 inch base dimensions at each mounting point set a compact contact area, which suits narrow rails without overlapping decorative edges. The specified 8-32 x 1 inch screw size offers a familiar machine thread used widely in cabinet hardware, aiding quick change-out when swapping older pulls that share the same thread size. Because the pull body is zinc with a satin nickel finish, the appearance and feel stay consistent across multiple units on the same project, supporting uniform results from cabinet to cabinet.
The Amerock Concentric pull uses a 5-1/16 inch (128 mm) center-to-center drilling pattern, which matches a common cabinet hardware standard for doors and drawers.
The BP36831G10 pull has a 5-3/4 inch overall length, 11/16 inch width, and a 15/16 inch projection, giving a mid-sized handle with defined grip and finger clearance.
This Amerock Concentric Series pull is made from zinc with a satin nickel finish, pairing a metal body with a muted metallic surface suitable for many cabinet styles.
The pull specifies 8-32 x 1 inch screws, so it uses a standard cabinet hardware machine thread and a length suited to typical cabinet front thicknesses.
The Amerock Concentric pull has a 15/16 inch projection, setting the gripping surface just under an inch off the cabinet face for finger clearance.
Each mounting base on this pull measures 5/16 inch by 5/16 inch, defining a compact footprint where the pull contacts the cabinet surface.
The Amerock Concentric Series 5-1/16 inch (128 mm) center to center satin nickel pull gives cabinet builders and installers a zinc handle with defined dimensions and a neutral finish. The 5-3/4 inch overall length, 11/16 inch width, and 15/16 inch projection work well on doors and drawers drilled on the 128 mm standard. With clearly specified base dimensions and 8-32 x 1 inch screw size, this BP36831G10 pull fits into established cabinet hardware workflows. For projects needing coordinated satin nickel decorative hardware and moldings, selecting this Concentric pull supports consistent appearance and handling across the installation.