Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Amerock Concentric gunmetal pull is a zinc cabinet handle from Amerock Corporation that provides a defined 5-1/16 in center-to-center grip span, giving installers a predictable drill layout that keeps handle alignment consistent across doors and drawers. The handle length of 5-3/4 in creates a modest overhang beyond the mounting holes, offering finger clearance without crowding adjacent fronts. A gunmetal finish on the zinc material delivers a darker modern look that coordinates with contemporary cabinet colors in kitchens and shops. The pull projection of 15/16 in sets the gripping surface away from the face just under an inch, which helps fingers clear raised panels while keeping the pull close enough for tight spaces. A width of 11/16 in gives the profile a slim appearance while still presenting enough surface for a comfortable grab during regular cabinet use.
The 128 mm center-to-center measurement matches the stated 5-1/16 in spacing, giving both metric and imperial reference points for layout on different shop tools. This dual reference lets installers work from metric boring equipment or imperial jigs without translating measurements. The 5-3/4 in overall length then frames how the pull will sit visually on drawer faces, aiding in choosing its position relative to drawer edges. With a projection of 15/16 in, the pull remains close to the cabinet face, which can be important when fitting doors behind reveals or near appliances. The compact 5/16 in by 5/16 in base dimensions at each mounting point allow the pull to seat on narrower framing members, which is useful on slim rails or reduced-width drawer fronts.
This Amerock Concentric Series pull, with a 5-1/16 in center-to-center layout, suits cabinets and drawers sized for mid-length handles, letting installers standardize on one boring pattern across a project. The gunmetal finish pairs with darker stains and painted fronts, creating a uniform appearance on kitchen, bath, or shop cabinetry that favors a subdued tone. Its overall 5-3/4 in length allows it to sit comfortably on typical base and wall cabinet fronts without overwhelming narrower facings. The 11/16 in width keeps the pull visually slim, which can be important on clean-lined, modern layouts that rely on minimal hardware presence. With a 15/16 in projection, the pull supports regular opening and closing of doors and drawers while staying close to the face, which can be valuable on cabinetry near walkways or tight corridors.
The matched 5-1/16 in and 128 mm center-to-center specifications give a clear drilling standard, which helps reduce layout errors when moving between metric boring machines and imperial tape measures. That precise spacing also supports replacing existing pulls that already use the same distance, allowing the new Amerock Concentric gunmetal pull to occupy the existing hole pattern. The 5-3/4 in length defines how much handle is available for grip at the outer edges, assisting in predictable hand clearance on wider drawers. A 15/16 in projection keeps the grip plane set just under an inch off the door or drawer, which can improve leverage for users without pushing hardware too far into the room. The compact 5/16 in by 5/16 in base size limits contact with the cabinet surface, which can help the pull land neatly on narrow framing details without overhanging edges.
The Amerock BP36831GM pull has a 5-1/16 in center-to-center, or 128 mm, spacing, which sets the drilling distance for mounting holes across doors and drawers.
The Amerock Concentric Series gunmetal pull measures 5-3/4 in in overall length, helping determine how it visually fits on different cabinet and drawer widths.
This zinc cabinet pull has a 15/16 in projection, setting the gripping surface just under an inch off the cabinet face for finger clearance in everyday use.
The Amerock cabinet handle gunmetal model has an 11/16 in width, giving a slim front profile that suits modern cabinet designs.
The base dimensions are 5/16 in by 5/16 in at each mounting point, which allows the pull to sit on narrower rails or stiles.
The Amerock BP36831GM pull is made from zinc with a gunmetal finish, providing a solid-feeling handle with a darker, contemporary appearance.
The Amerock Concentric Series 5-1/16 in center-to-center gunmetal pull combines a defined 128 mm mounting span with a 5-3/4 in overall length, giving installers clear drilling and layout dimensions. Its 15/16 in projection and 11/16 in width set a compact working profile that suits tight, modern cabinet runs. With zinc construction and a gunmetal finish, the pull aligns with projects needing a darker tone. Use these verified dimensions and finish details to choose this handle where a consistent Amerock Concentric look and 5-1/16 in hole spacing are required.