Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Amerock Concentric matte black pull is a 6-5/16 in (160 mm) center to center cabinet handle designed for decorative hardware projects where precise hole spacing is already laid out. The stated 6-5/16 in (160 mm) center to center dimension sets the handle length between screw holes, so it matches common cabinet drilling patterns on doors and drawers. The overall 7 in length gives a bit of extra hand contact area beyond the mounting points, which helps on wider drawer fronts or frequently used doors. A projection of 15/16 in spaces the grip off the face of the cabinet, giving fingers clearance while keeping the profile relatively tight to the surface. The 11/16 in width defines the front face size of the pull, shaping how it looks on narrow or wide rails. A matte black finish provides a dark, non-reflective appearance that supports modern or contrast-focused layouts.
The 6-5/16 in (160 mm) center to center measurement dictates drilling distance between mounting holes, so existing or new holes can be laid out to that exact span for a secure fit. The specified 7 in length then sets how far the pull extends across the cabinet face beyond those holes, which matters when balancing proportions on both compact and wider fronts. A projection of 15/16 in determines how far the handle stands off the cabinet, influencing both finger clearance and how far the hardware reaches into the room. The 11/16 in width defines the face dimension you will see and feel when gripping the pull. The pull uses 8-32 x 1 in screws, tying it to a common cabinet hardware thread and length that mates with standard cabinet door and drawer thicknesses in many shop builds.
The Amerock BP36832MB pull, with its 6-5/16 in (160 mm) center to center layout, aligns with cabinet fronts drilled on that spacing, which simplifies planning on banks of drawers or full kitchen runs. The 7 in overall length scales well on medium to large fronts, helping the pull look proportional on wide drawers while still functioning on narrower doors. A projection of 15/16 in keeps the grip close to the door yet leaves enough space for fingers during repeated openings, which is useful on high-use cabinets. The 11/16 in width maintains a lean visual line, so the pull does not visually crowd narrow stiles or rails. Base dimensions of 5/16 in by 5/16 in at each end keep the mounting footprint compact, which can matter when working near panel details or glass frames.
The defined 6-5/16 in (160 mm) center to center spec gives a fixed reference for drilling jigs or CNC setups, which supports repeatable hole placement across multiple fronts in a project. The specified 7 in full length tells you exactly how much of the cabinet face the pull will span, helping lay out hardware relative to panel edges and mid-rails. With a 15/16 in projection, the pull creates a predictable stand-off that affects both ergonomics and clearance against surrounding trim. The 11/16 in width and 5/16 in by 5/16 in base dimensions together describe the visible footprint, supporting layout decisions where several pulls are lined up. Zinc material construction defines the pull as a metal component within the decorative hardware assembly, while the matte black finish provides a consistent dark tone that can be repeated from cabinet to cabinet.
The Amerock BP36832MB pull has a 6-5/16 in (160 mm) center to center hole spacing, which sets the drilling distance between mounting holes on cabinet doors and drawers.
The pull length is 7 in, so it extends slightly past the 6-5/16 in mounting span and provides a longer gripping area across the cabinet face.
The pull has a projection of 15/16 in, setting how far it stands off the cabinet surface and influencing finger clearance during use.
The pull width is 11/16 in, defining the visible front dimension and affecting how the hardware looks on narrow or wide cabinet frames.
The pull is made from zinc with a matte black finish, giving a metal body with a dark, low-sheen appearance for decorative cabinet applications.
The pull uses 8-32 x 1 in screws, matching a common cabinet hardware thread and length for many door and drawer thicknesses.
The Amerock Concentric matte black pull pairs a 6-5/16 in (160 mm) center to center layout with a 7 in overall length, fitting cabinets drilled on that span while offering a generous hand grip. Its 15/16 in projection and 11/16 in width set a compact yet functional profile that works across doors and drawers. Zinc construction with a matte black finish defines both the material body and visual tone for decorative hardware projects. For cabinets built around 160 mm spacing, this BP36832MB pull provides defined dimensions that support consistent hardware placement from one front to the next.
Sold In: 1 Each