Amerock Concentric gunmetal pull is a zinc handle from Amerock Corporation designed for cabinet and drawer use where a modern, coordinated look matters. The pull belongs to the Concentric collection, so it keeps styling consistent across multiple fronts on a job. Its gunmetal finish provides a darker metallic tone that pairs well with contemporary casework, helping installers match hardware to popular cabinet colors. The center-to-center drilling of 10-1/16 in (256 mm) sets the mounting layout, which is important when aligning with pre-bored doors and drawer fronts. Overall length of 10-3/4 in gives the pull a substantial span across wider fronts, making it easier for users to grab with one hand. A projection of 15/16 in stands the handle off the surface enough for comfortable finger clearance during everyday use. Width of 11/16 in keeps the profile slim while still reading as a full-size cabinet pull.
The Concentric pull uses a 10-1/16 in (256 mm) center-to-center dimension, which defines the distance between mounting holes and guides drilling templates or jig setups. This measurement aligns with metric 256 mm layouts common in many cabinet runs, helping simplify layout across banks of doors and drawers. Base dimensions of 5/16 in length by 5/16 in width concentrate the load at compact mounting pads, which is useful when working near panel edges or narrow stile widths. The specified screw size of 8-32 x 1 in matches a standard cabinet hardware thread and length, so installers can plan for typical door and drawer front thicknesses when setting up their work. Together, these dimensions support repeatable mounting across multiple fronts on residential or commercial casework.
The Amerock Concentric Series 10-1/16 in (256 mm) center to center gunmetal pull works well wherever a longer cabinet handle is preferred, such as wider base drawers or tall doors. Its overall length of 10-3/4 in lets the pull span a larger portion of the front, which helps distribute hand contact and gives users a clear grab point. The 10-1/16 in (256 mm) center-to-center measurement aligns with projects that follow metric-based drilling, helping keep hole patterns consistent across a full kitchen or built-in installation. With a width of 11/16 in, the pull presents a slim face to the user while still reading as a full-sized handle on standard face-frame or frameless cabinets. The 15/16 in projection provides space between the pull and door surface so fingers can wrap behind it during operation, which is important on heavier drawers. The gunmetal finish suits projects where a deeper metallic tone is desired on both cabinet doors and furniture-style pieces using the same hardware line.
The Concentric pull's 10-1/16 in (256 mm) center-to-center layout allows installers to standardize drilling patterns, which reduces layout time when repeating the same pull across an entire room. When replacing existing 256 mm pulls, this dimension keeps hole locations usable, limiting additional drilling. Base dimensions of 5/16 in by 5/16 in keep each mounting footprint compact, so the pull can be positioned on narrower rails without crowding adjacent profiles or moldings. The 8-32 x 1 in screw size specification gives tradespeople a clear fastener match for typical door and drawer front thicknesses, supporting predictable grip and thread engagement. Zinc construction provides a stable base for the gunmetal finish, helping the pull maintain its appearance under regular handling on frequently used cabinets. Because this pull is part of the Concentric collection, specifiers can pair it with other pieces from the same line to keep hardware styling consistent from one cabinet zone to the next.
The Amerock Concentric gunmetal pull has a 10-1/16 in (256 mm) center-to-center size, which sets the drilling distance between mounting holes for cabinet doors and drawers.
The Amerock BP36834GM cabinet pull has an overall length of 10-3/4 in, giving it enough span to work well on wider cabinet drawers and taller doors.
The Concentric Series pull is made from zinc, which provides a solid body for the handle and supports detailed shaping on decorative hardware projects.
The gunmetal cabinet pull has a projection of 15/16 in, standing it off the cabinet face enough to give users comfortable finger clearance during operation.
This Amerock Concentric pull uses an 8-32 x 1 in screw size, aligning with standard cabinet hardware threads and typical door or drawer front thicknesses.
The BP36834GM pull has base dimensions of 5/16 in length by 5/16 in width, creating compact mounting pads suitable for narrow rails or stiles.
The Amerock Concentric gunmetal pull with 10-1/16 in (256 mm) center-to-center drilling, 10-3/4 in overall length, and 15/16 in projection gives installers a clear set of dimensions for layout. The zinc construction, gunmetal finish, and defined base size of 5/16 in by 5/16 in support consistent mounting on cabinet doors and drawers. For projects that call for a longer pull from the Concentric collection, this BP36834GM model offers a defined drilling pattern and proportions that suit wider fronts and coordinated hardware runs.