Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Amerock Kamari knob gives you a 1-3/16 inch diameter pull point in a compact round profile, so doors and drawers get a consistent hand feel across a run of cabinetry. The Golden Champagne finish defines the look, bringing a warm metallic tone that works with many stain or paint colors in residential or shop-built projects. With a 1 inch projection, this knob stands off the face just enough for fingers to grip without catching on clothing in tight traffic areas. The zinc construction forms a solid one-piece knob body, supporting dependable use in everyday cabinet applications. A manufacturer part number BP36820BBZ ties this knob directly to Amerock Kamari Series documentation and job planning. Base dimensions of 3/8 inch by 3/8 inch focus contact on a small footprint, which helps the knob seat cleanly on the door or drawer surface during installation.
The Kamari 1-3/16 inch knob size defines the drill point location relative to door or drawer edges, so installers can plan consistent setback across a bank of fronts. A 1 inch projection sets expectations for ergonomic reach, helping layout decisions around tall pantry doors or wide drawers. The 3/8 inch by 3/8 inch base dimension shows how much contact area sits against the wood or panel surface, which matters when marking centerlines or working near profile details. The specified 8-32 screw size with 1 inch length connects the knob to common cabinet drilling practices, matching a standard thread pattern frequently used in cabinet shops.
The Amerock Kamari cabinet knob with 1-3/16 inch diameter works well on standard cabinet doors and medium-width drawers, giving enough surface for controlled pulls without overpowering face proportions. Its Golden Champagne finish lets it sit comfortably in kitchens, baths, or built-ins where a soft metallic tone coordinates with other Golden Champagne cabinet knob choices or nearby metal finishes. With a 1 inch projection, this zinc cabinet knob suits upper and lower cabinets alike, keeping hand clearance consistent from base cabinets to wall units in the same room. The compact 3/8 inch square base supports mounting on flat panel fronts and on simpler profiled rails where only a small flat landing is available for hardware.
The zinc construction makes this 30 mm diameter knob appropriate for frequently used doors and everyday storage drawers, because the metal body responds predictably to repeated opening and closing cycles in normal residential and light commercial cabinetry. By tying the design to Amerock decorative hardware knob standards, the Kamari Series helps maintain a uniform look when this knob is repeated across an entire run of cabinets or combined with other Amerock pieces carrying the same Golden Champagne finish and styling cues.
The fixed 1-3/16 inch diameter and 1 inch projection give installers dependable reference points when laying out multiple fronts, so drill jigs and story sticks can be set once and used across the job with consistent knob reach. Using the 8-32 screw size means the through-hole and thread engagement are based on a familiar fastener dimension, which assists workflow in cabinet shops already set up for this thread pattern. The 3/8 inch by 3/8 inch base footprint defines how much flat area is required for proper seating, helping installers align the knob square to door edges without crowding into panel bevels or decorative grooves.
Because the knob is part of the Amerock Kamari Series, the BP36820BBZ identifier simplifies ordering multiples for larger kitchens, baths, or office millwork while holding the same Golden Champagne finish across every installed piece. The Golden Champagne finish also supports lighting consistency, as its warm metallic tone reflects ambient light in a controlled way, which can reduce visual noise when knobs are installed in long runs along banks of drawers or tall cabinet stacks. In day-to-day use, the zinc body, defined projection, and rounded profile combine to create a comfortable pull point that feels predictable every time the door or drawer is opened.
The Amerock Kamari knob has a 1-3/16 inch, or 30 mm, diameter, which sets the gripping area size and helps installers scale the knob to door and drawer proportions.
The Kamari Golden Champagne cabinet knob projects 1 inch from the surface, giving enough finger clearance for a comfortable pull while keeping the profile tight to the cabinet face.
The Amerock BP36820BBZ knob is made of zinc, providing a solid metal body that supports regular opening and closing of cabinet doors and drawers in typical use.
The Kamari BP36820BBZ knob has a Golden Champagne finish, which sets a warm metallic appearance that coordinates with similar-toned decorative hardware and fixtures.
This cabinet knob has base dimensions of 3/8 inch by 3/8 inch, defining the contact area on the door or drawer surface for square seating and clean alignment.
The Amerock Kamari knob uses an 8-32 screw size with 1 inch length, aligning with a common cabinet hardware thread standard used in many shop installations.
The Amerock Kamari cabinet knob in Golden Champagne combines a 1-3/16 inch diameter, 1 inch projection, and zinc construction to support everyday cabinet use with consistent sizing. With defined base dimensions and an 8-32 screw specification, this BP36820BBZ knob gives installers clear layout and fastening details for planning cabinet door and drawer hardware across new projects or upgrades.
