Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Amerock Kamari polished nickel knob gives cabinets a 1-3/16 inch diameter gripping point that is easy to grab and align during daily use. The 1 inch projection sets the hand away from the door surface, which helps reduce contact marks on finished fronts during repetitive opening. Constructed from zinc, the knob body provides a solid feel at this compact size, supporting consistent pulls on doors or drawers. The polished nickel finish creates a bright metallic surface that reflects light, which can help match other polished nickel decorative hardware in the same project. With a width of 1-3/16 inch and a base sized at 3/8 inch by 3/8 inch, the knob presents a defined footprint on the cabinet face while keeping the contact area focused around the mounting point.
The Amerock Kamari cabinet knob uses a length or diameter of 1-3/16 inch, which sets the visible knob size relative to typical door rails and drawer fronts. This proportion helps the knob register clearly without overpowering surrounding profiles. Its 1 inch projection establishes the stand-off distance from the door or drawer surface, creating clearance for fingers while limiting how far the knob extends into walk paths. The 8-32 x 1 inch screw size defines the threaded interface, aligning with common cabinet drilling practices that rely on a standard machine-screw thread. By using this standard thread size, the knob can be driven to consistent tightness against the 3/8 inch by 3/8 inch base, so the contact area seals firmly against the cabinet face.
The Kamari series knob with a 1-3/16 inch diameter works well on cabinet doors where a defined but compact pull point is preferred. Its width and matching length of 1-3/16 inch allow it to sit comfortably on narrow stiles or rail sections without crowding moldings. On drawers, the same diameter offers a centered grip that suits single-knob layouts on small and medium drawer fronts. The 1 inch projection keeps the gripping point reachable even when mounted near frame edges, while staying close enough to the surface to limit snagging on passing clothing. Because the knob finish is polished nickel, it aligns with cabinet installations that already use polished nickel faucets, hinges, or decorative hardware, helping tie those elements together visually across a kitchen, bath, or casework run. The square 3/8 inch by 3/8 inch base provides a small, precise landing area on painted, stained, or laminated fronts, which can support a refined appearance in detailed millwork.
The Amerock Kamari polished nickel knob uses a zinc body that accepts the 8-32 x 1 inch screw along a centered axis, which supports straight pull forces during opening and closing cycles. This combination of zinc material and standard screw size helps the knob seat tightly against the 3/8 inch by 3/8 inch base area, so the contact point resists twisting under normal hand loads. The 1 inch projection fixes the distance from the door surface, creating a repeatable offset that can be matched across multiple cabinet fronts for visual alignment. Because the knob length or diameter is 1-3/16 inch, layouts can be planned by repeating this dimension along lines of doors and drawers, supporting consistent spacing between edge reveals and hardware centers. The polished nickel finish provides a smooth, continuous exterior that transitions cleanly from the wider 1-3/16 inch face to the smaller base, which helps shed dust at the edges and makes wipe-downs on exposed faces straightforward during regular shop or household cleaning.
The Amerock Kamari polished nickel knob has a 1-3/16 inch length or diameter and a matching 1-3/16 inch width, which sets a compact yet visible pull point on cabinet doors and drawers.
The knob has a 1 inch projection from the mounting surface, which creates finger clearance while keeping the hardware close to the cabinet face for a low-profile appearance.
The Amerock Kamari BP36820PN knob is made of zinc, which provides a solid, uniform body around the threaded hole for dependable mounting on cabinet fronts.
This Kamari series cabinet knob uses a polished nickel finish, giving a bright, reflective metal surface that coordinates with other polished nickel decorative hardware.
The Amerock decorative knob has base dimensions of 3/8 inch by 3/8 inch, creating a compact contact area that focuses the bearing surface around the mounting point.
The Amerock Kamari cabinet knob uses an 8-32 x 1 inch screw size, matching a standard machine-screw thread commonly applied in cabinet knob installations.
The Amerock Kamari polished nickel knob pairs a 1-3/16 inch diameter face with a 1 inch projection, giving a defined grip point and consistent stand-off from the cabinet surface. With zinc construction, polished nickel finish, and a 3/8 inch by 3/8 inch base, the knob offers a compact footprint ready for aligned layouts across doors and drawers. The 8-32 x 1 inch screw interface supports standard cabinet boring setups, so this Kamari series option can be matched confidently across your next decorative hardware run.
