
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Amerock Kamari satin nickel knob identifies this piece as part of the Amerock Kamari Series, so it pairs cleanly with other Kamari decorative hardware on the same job. The knob uses a satin nickel finish, which gives a muted metallic look that works well on many cabinet finishes. The knob is made from zinc, providing a solid metal construction for everyday cabinet use. Its length is 1-3/16 in (30 mm), which sets the overall grasp area from side to side. The width is also 1-3/16 in (30 mm), creating a square profile that looks balanced on doors and drawers. The projection is 1 in, so the knob stands off the cabinet face enough for finger clearance. The base length and base width are each 3/8 in, which defines the small footprint where the knob meets the door or drawer front.
This Amerock Corporation Kamari knob uses screw mounting through the cabinet front, with the knob threading onto the screw from the outside. The specified screw size is 8-32 x 1 in, which matches common cabinet door and drawer front thicknesses. That screw size information helps align the knob with standard 8-32 drilled and tapped installations. The 1 in projection works with typical door overlays, giving enough clearance so fingers can pull without rubbing the cabinet surface. With a 1-3/16 in length and width, the knob centers well on standard rail and stile widths and typical drawer front sizes. The compact 3/8 in by 3/8 in base sits fully on most cabinet face frames and slab fronts, defining a precise bearing area against the finished surface.
This decorative hardware knob falls under the Knobs, Amerock product class, positioning it for cabinet door and drawer projects that call for Amerock styling. The 1-3/16 in (30 mm) length and width help it scale well on face-frame and frameless cabinetry where a medium-size pull point is preferred. Its satin nickel finish aligns with other satin nickel decorative hardware and moldings, helping maintain a consistent finish scheme across a kitchen, bath, or built-in project. The zinc material keeps the knob in the metal decorative hardware category, so it suits interior cabinet environments where a metal touchpoint is expected. Because the base measures 3/8 in by 3/8 in, the knob can be positioned on narrow rails without the base overhanging the edge, which is useful when laying out multiple doors in a run.
The Amerock Corporation manufacturer part BP36821G10 precisely identifies this knob, which aids repeat ordering for multi-phase jobs or later service work. The defined 1 in projection gives installers a consistent stand-off from the door or drawer front, so a bank of cabinets will show even spacing when viewed from the side. With equal 1-3/16 in length and width, the knob can be rotated without changing its appearance, which simplifies alignment during installation because orientation does not alter the look. The 3/8 in by 3/8 in base dimension allows layout marks to be set accurately at a fixed distance from edges, supporting repeatable centerline positioning across many fronts. Using the stated 8-32 x 1 in screw size keeps all attachment points using the same thread standard, which streamlines drilling patterns and reduces variation across the project.
The Amerock Kamari knob is 1-3/16 in (30 mm) long and 1-3/16 in (30 mm) wide, which creates a compact, square pull point suitable for typical cabinet doors and drawers.
The knob has a 1 in projection, so it stands off the cabinet face enough for finger clearance while keeping a relatively low overall profile on the door or drawer.
The BP36821G10 Kamari knob is made from zinc, giving it a metal construction that supports regular cabinet door and drawer operation in interior spaces.
This Kamari Series knob uses a satin nickel finish, providing a soft metallic look that coordinates with other satin nickel decorative hardware elements in a project.
The Kamari knob is specified with an 8-32 x 1 in screw size, matching a common cabinet hardware thread and length for standard door and drawer front thicknesses.
The knob base measures 3/8 in long by 3/8 in wide, giving a compact contact area that fits comfortably on narrow rails and standard drawer front layouts.
The Amerock Kamari satin nickel knob BP36821G10 provides a 1-3/16 in square profile with a 1 in projection, giving cabinets a consistent pull point across doors and drawers. With zinc construction, satin nickel finish, and defined base dimensions, it slots into decorative hardware layouts where Amerock styling and repeatable measurements matter. For projects using satin nickel decorative hardware and moldings from Wurth Baer Supply, this Kamari Series knob offers a clearly defined size, finish, and thread standard ready to drop into cabinet door and drawer layouts.