Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Amerock Kamari knob gives cabinet doors and drawers a 1-3/16 inch by 1-3/16 inch grip point, so installers get a balanced pull that feels centered on the hand during everyday use. The knob is part of Amerock Corporation's Kamari collection, which keeps projects consistent when multiple knobs are needed across a kitchen or bank of casework. A 1 inch projection sets the knob out from the cabinet face, providing enough clearance for fingers while keeping the profile tight to the door or drawer front. The zinc construction creates a solid-feeling knob body, supporting repeated operation on active cabinets. The golden champagne finish adds a warm metallic tone that pairs with many door styles, helping shops and installers hit common design targets without overthinking finish matching.
The Kamari 1-3/16 inch by 1-3/16 inch knob size works well on both doors and medium-width drawers, so shops can repeat the same drilling pattern across multiple cabinet types. A 1 inch projection defines how far the knob stands off the face, which matters when lining up hardware near adjacent walls or appliances where extra protrusion could interfere. The 3/8 inch by 3/8 inch base keeps the contact area tight, helping the knob land cleanly on narrow door frames without overlapping edge profiles. With its 8-32 x 1 inch screw size callout, the knob installs on standard cabinet bores that already expect this thread, supporting straightforward mounting in new work or hardware swaps.
This Amerock Kamari knob sits in the Decorative Hardware & Moldings category, making it suited for visible cabinet fronts where hardware becomes part of the finished look. The golden champagne finish lets the knob work on warm wood tones or painted fronts that lean toward beige or cream, giving designers and installers a neutral metallic option. Its 1-3/16 inch width and length mean the knob reads proportionally on standard cabinet doors and many drawer fronts, so it does not get lost visually or dominate small faces. The compact 3/8 inch by 3/8 inch base allows the knob to be positioned comfortably on narrow rails, which is useful when working with framed cabinets or decorative edge profiles that limit mounting real estate. Because the knob belongs to the Kamari collection, it can be paired with other Kamari pieces where matching style across multiple cabinet runs is important.
The defined 1-3/16 inch by 1-3/16 inch size of the Kamari knob helps installers set up jigs and drilling templates once, then repeat holes accurately across a job without rethinking placement. A 1 inch projection gives a known stand-off from the surface, which aids layout when lining up knobs along upper and lower cabinets so sightlines remain consistent. The 3/8 inch by 3/8 inch base dimension tells fabricators how much flat area is needed around the mounting point, helping avoid conflicts with edge profiles or panel reveals. With an 8-32 x 1 inch screw size specification, the knob aligns with standard cabinet hardware threading, simplifying integration into existing shop workflows that already stock matching fasteners. The zinc material adds weight and rigidity to the knob body, supporting reliable operation over time on doors and drawers that see frequent opening cycles.
The Amerock Kamari knob measures 1-3/16 inches in length and 1-3/16 inches in width, providing a balanced, near-square grip that suits standard cabinet doors and many drawer fronts.
The Kamari BP36821BBZ knob has a 1 inch projection from the cabinet face, giving finger clearance while keeping the hardware profile relatively low on doors and drawers.
The Amerock Kamari series knob is made from zinc, providing a solid-feeling knob body suitable for repeated cabinet door and drawer use in everyday environments.
The Kamari 1-3/16 inch knob uses a golden champagne finish, giving a warm metallic tone that coordinates with many contemporary cabinet colors and other warm metal hardware.
The Amerock BP36821BBZ knob has a base measuring 3/8 inch by 3/8 inch, allowing it to sit neatly on narrow rails and detailed cabinet face frames.
The Amerock Kamari knob specifies an 8-32 x 1 inch screw size, aligning with a common cabinet hardware thread for straightforward installation on standard bores.
The Amerock Kamari knob BP36821BBZ from Wurth Baer Supply combines a 1-3/16 inch by 1-3/16 inch profile, 1 inch projection, and 3/8 inch square base to handle day-to-day cabinet use with a compact footprint. Its zinc construction and golden champagne finish support projects needing a sturdy, warm-toned knob that coordinates easily with other decorative hardware. For cabinet shops and installers working within the Decorative Hardware & Moldings category, this Kamari series knob offers defined dimensions and a standard 8-32 x 1 inch screw size that integrate cleanly into existing drilling patterns and hardware setups.