Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Amerock Kamari matte black knob is a 1-3/16 in long by 1-3/16 in wide cabinet knob designed for decorative hardware applications where precise sizing matters. The square 30 mm by 30 mm face gives a balanced pull point on doors and drawers, which supports consistent alignment across a run of cabinets. A 1 in projection sets the hand grip comfortably off the front, helping doors clear adjacent faces while keeping the knob from sticking out too far in tight passes. The knob is made from zinc, so it provides a solid-feeling contact point in everyday use. A matte black finish keeps reflections down compared with glossy finishes, which can help the hardware visually recede on darker fronts or create contrast on light-colored surfaces.
This Amerock Corporation Kamari knob is part of the Amerock decorative hardware knob class, so it is sized for typical cabinet door and drawer applications that use this style of pull point. The knob uses a central threaded connection designed for an 8-32 screw, so it interfaces with common cabinet drilling patterns that accept that thread size. With its 1-3/16 in by 1-3/16 in footprint and 3/8 in by 3/8 in base, the contact area stays compact at the mounting point, which is useful on narrow rails or stiles. The 1 in projection defines how far the hand engages from the face, which is important when coordinating knob clearance with nearby doors, drawer fronts, and adjacent hardware.
The Amerock Kamari cabinet knob, at 1-3/16 in length and 1-3/16 in width, suits cabinet doors and drawers that benefit from a square pull point with clear edges. Its dimensions support layouts on standard residential or commercial cabinetry where hardware spacing and symmetry are important. The 3/8 in by 3/8 in base dimension allows the knob to sit comfortably on narrow stile widths without overpowering the rail, which is useful on smaller doors or face frames. A 1 in projection provides enough stand-off for fingers to hook behind the knob, which helps when opening heavier doors or packed drawers that resist movement at first pull. The zinc construction ties the body together under load, which supports regular handling in frequently used cabinet locations such as kitchens, bath vanities, and storage runs.
The Kamari knob from Amerock Corporation uses a square 30 mm by 30 mm face, so installers can reference a single edge distance both vertically and horizontally when laying out hole locations. That equal length and width simplifies templating, because measuring from door or drawer edges to center is the same in both directions. The 1 in projection is fixed, which gives a known offset from the front surface when coordinating with nearby pulls, appliance handles, or adjacent walls. Its 3/8 in by 3/8 in base keeps the transition from front surface to knob compact, which can help maintain a clean visual line when multiple knobs are aligned across wide drawer banks. The central threaded connection sized for an 8-32 screw gives a standard interface, supporting consistent mounting torque and reducing variation from knob to knob on a large job.
The Amerock Kamari knob measures 1-3/16 in in length and 1-3/16 in in width, providing a square 30 mm by 30 mm face that helps maintain visual balance on cabinet doors and drawers.
The Kamari cabinet knob has a 1 in projection, setting a consistent stand-off from the cabinet surface that supports finger clearance while keeping the knob profile compact in tight spaces.
The Amerock BP36821MB Kamari knob is made from zinc, giving the knob a unified metal body that provides a solid-feeling hand contact point during regular cabinet use.
The Kamari knob uses a matte black finish, creating a non-reflective surface that can either blend with dark cabinetry or provide visual contrast against lighter cabinet fronts.
The Amerock Kamari knob is designed for an 8-32 screw, aligning with common cabinet hardware threading so the knob can be mounted through standard drilled cabinet fronts.
The Kamari matte black knob has base dimensions of 3/8 in length by 3/8 in width, concentrating the contact area for precise placement on narrow cabinet rails or stiles.
The Amerock Corporation Kamari matte black zinc knob, at 1-3/16 in by 1-3/16 in with a 1 in projection, gives a defined, repeatable hardware point for cabinet doors and drawers. Its 3/8 in by 3/8 in base and central 8-32 threaded connection support precise placement on face frames and drawer fronts. For projects that call for a square, matte black pull in the decorative hardware and moldings knob category, this BP36821MB part number from Wurth Baer Supply aligns dimensions, material, and finish for consistent cabinet hardware layouts.