Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Amerock Kamari knob defines this piece as a cabinet knob from Amerock Corporation, so it suits projects where a decorative and functional pull point is needed on doors or drawers. The knob size of 1-3/16 in length and 1-3/16 in width creates a compact, centered grip, which helps doors open predictably without taking up extra face space on smaller fronts. A projection of 1 in sets the hand-off distance from the cabinet surface, giving fingers room to pull while keeping the profile tight for close-clearance applications. The square base dimensions of 3/8 in by 3/8 in concentrate contact at the mounting point, which helps the knob seat firmly against the surface. The polished nickel finish identifies the visual look as bright and reflective, which supports a clean, modern hardware appearance in kitchens, baths, or built-ins where matching nickel finishes are used.
The Amerock Kamari Series knob uses an 8-32 thread size, which ties into standard cabinet knob drilling and tapping practices across many shop jigs and templates. A screw length of 1 in sets the engagement depth through typical cabinet doors and drawer fronts, which helps match common panel thicknesses found in many residential cabinets. The 3/8 in by 3/8 in base dimension concentrates support around the fastener location, which helps the knob seat flat when tightened. With a length and width of 1-3/16 in, the Kamari knob provides a centered pull point in relation to the fastener axis, which supports a straight, predictable pull during use.
The Amerock Kamari knob belongs to the Kamari collection, which identifies it as part of a coordinated decorative hardware line for cabinets and similar casework. The knob size of 1-3/16 in by 1-3/16 in suits cabinet doors and drawers that need a defined single pull point rather than a longer handle, which helps on narrower fronts and smaller faces. A 1 in projection keeps the working depth moderate, which is useful in tight corridors or galley runs where handles cannot extend too far into the walkway. The polished nickel finish matches other polished nickel cabinet hardware, which supports visual continuity when building a hardware schedule across a kitchen or bathroom. With a compact 3/8 in square base, the Kamari knob fits on slim rails or reduced stile widths, which is helpful when layout space near panel edges is limited.
The Amerock Kamari knob uses a standard 8-32 threaded interface, which means existing drilling jigs set up for that thread can place and fasten these knobs without reconfiguring shop tooling. The 1 in screw length aligns with many common door and drawer front thicknesses, which simplifies planning for through-bore depth and grip engagement from the back side. The 1-3/16 in width and length provide stable finger contact, which helps users pull heavier drawers or loaded cabinet doors without slipping off a small profile. A 1 in projection establishes a consistent distance from the face, which keeps knobs in the same plane when mixed with other pieces from the Kamari line that share similar stand-off dimensions. The polished nickel finish defines a bright metal look, which allows designers to repeat the same surface throughout a project for predictable color and sheen under various lighting conditions.
The Amerock Kamari knob measures 1-3/16 in in length and 1-3/16 in in width with a 1 in projection, which sets a compact, consistent footprint on cabinet doors and drawers.
The Kamari BP36821PN knob is made from zinc, which supports precise shaping of the knob profile and crisp transition lines around edges on finished cabinet fronts.
The polished nickel finish gives the Kamari knob a bright, reflective surface, which helps it visually coordinate with other polished nickel cabinet hardware in the same space.
The Kamari cabinet knob uses an 8-32 screw size at 1 in length, which fits many standard cabinet door and drawer front thicknesses in typical installations.
The Amerock Kamari knob has a 1 in projection, which sets a moderate stand-off that leaves finger clearance while keeping hardware close to the cabinet surface.
The Amerock Kamari BP36821PN knob has a 3/8 in by 3/8 in base, which fits well on narrow rails or reduced stile widths without overhanging edges.
The Amerock Kamari knob, part number BP36821PN, combines a 1-3/16 in by 1-3/16 in footprint with a 1 in projection, which fits many cabinet door and drawer layouts. With zinc construction, an 8-32 x 1 in fastener interface, and a polished nickel finish, this knob aligns with standard cabinet hardware practices while supporting polished nickel design schemes. For cabinet projects running Amerock decorative hardware from Wurth Baer Supply, this Kamari knob gives a defined, repeatable pull point sized for everyday residential cabinet use.