Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Amerock Kamari pull 96mm center to center gives cabinets and drawers a defined grip point using a 3-3/4 in (96 mm) center-to-center layout, so hole spacing aligns with common cabinet drilling patterns and keeps multiple fronts visually consistent across a run. The zinc construction creates a solid, uniform body, which supports repeatable milling and predictable handling on doors or drawers of varying sizes. A matte black finish provides a dark, even surface across the pull, helping visually tie together face frames and fronts where a consistent color band is needed along a bank of cabinets. The 4-15/16 in length sets a clear hand contact area beyond the mounting points, which helps installers and users grasp the pull comfortably without crowding fingers near the fasteners. A 1 in projection brings the pull far enough off the surface to allow fingers behind the bar, while keeping the pull close to the front to reduce snagging in tight galley or corridor layouts.
The 3-3/4 in (96 mm) center-to-center mounting span on the Amerock Kamari pull lines up with standard drilling for many cabinet layouts, which streamlines retrofits or new construction where consistent spacing across doors and drawers is important. A 1 in projection from the cabinet face defines the stand-off distance, keeping the pull close enough for compact spaces while providing room for fingers to comfortably wrap behind the bar during daily use. The 3/8 in by 3/8 in base dimensions at each end of the pull set a compact footprint at the contact points, which helps the pull seat cleanly on narrow rail sections or smaller drawer fronts without overhanging edges. The 4-15/16 in overall length works across both small and mid-size fronts by giving a defined grab area that aligns visually with surrounding hardware in a kitchen, bath, or shop layout.
The Amerock Kamari Series 3-3/4 in (96 mm) center-to-center pull fits projects that follow a 96 mm drilling pattern, because the mounting holes align with that measurement and allow installers to reuse existing layouts or standard jigs. In cabinet runs where drawer and door sizes vary, the 4-15/16 in length keeps the hardware scale consistent, so small vanity drawers and wider base cabinet doors share the same visual hardware line. The 1 in projection supports comfortable gripping on both face-frame and frameless cabinets by creating enough clearance for fingers even when drawers are closely stacked. The 1-3/16 in width and 3/8 in by 3/8 in base dimensions create a defined visual bar and compact attachment points, which work well on narrow rails, shaker-style fronts, or modest drawer heights where oversized pulls might look out of proportion.
The 3-3/4 in (96 mm) center-to-center dimension on this Kamari zinc cabinet pull anchors alignment because installers can rely on a precise measurement from screw to screw when laying out fronts across a wall of cabinets. Using a pull with a known 4-15/16 in overall length simplifies setting identical offsets from cabinet edges; a tape or story stick quickly confirms each pull sits the same distance from the stile or top edge. The 1 in projection defines how far the hardware extends into the room, which helps maintain a uniform line so doors do not feel staggered or uneven when viewed from the side. With a 1-3/16 in width, the pull presents a clear straight edge that can be visually squared against cabinet lines, reducing the chance of slight rotation that becomes noticeable once a full bank of doors is outfitted. The matte black finish keeps the surface tone consistent from pull to pull, supporting clean visual alignment in both residential and shop built-in applications.
The Amerock Kamari Series pull uses a 3-3/4 in (96 mm) center-to-center mounting dimension, which matches common cabinet drilling patterns and supports consistent spacing across multiple doors and drawers.
The Kamari BP36822MB pull has a 4-15/16 in overall length, setting a clear footprint on each cabinet front for visual consistency along bases and uppers.
The Amerock Kamari matte black pull provides a 1 in projection, creating finger clearance behind the pull while keeping hardware close to the cabinet face in tighter corridors or work areas.
The Amerock Kamari BP36822MB pull is made from zinc, giving it a solid metal body that supports a consistent feel across all cabinets using this design.
This Kamari cabinet pull uses a matte black finish, providing a dark, low-gloss appearance that coordinates with a range of cabinet colors and styles.
The Amerock Kamari pull has base dimensions of 3/8 in length by 3/8 in width at each end, allowing it to sit neatly on narrower rails or smaller drawer fronts.
The Amerock Kamari Series 3-3/4 in (96 mm) center-to-center matte black pull combines a 96 mm mounting span, zinc construction, and a 4-15/16 in length, giving installers a defined, repeatable hardware choice for cabinet and drawer fronts using that drilling pattern. The 1 in projection, 1-3/16 in width, and 3/8 in by 3/8 in base dimensions keep the pull functional in hand and visually balanced on both smaller and mid-size fronts. For projects calling for a matte black Amerock pull with these specific measurements and feel, this BP36822MB model aligns cleanly with those requirements.