Berenson Brookridge Series Verona Bronze 12" (305 mm) Center to Center Appliance Pull, -2637-10VB-P
Description
Brookridge Appliance Pull 12 Inch For Appliances
Brookridge appliance pull 12 inch is a Berenson Corporation appliance pull from the Brookridge collection in a transitional style, so it bridges traditional and contemporary projects when you need a consistent look across your appliance fronts. The pull is made from zinc, which gives a solid metal feel while allowing precise shaping of the transitional profile that works well on panel-ready appliances. Its Verona Bronze finish delivers a dark, warm tone on the zinc base, which helps this pull coordinate with common bronze hinges and other bronze cabinet hardware on surrounding doors and drawers. The center to center dimension is 12 inches, so it spans wider appliance panels in a balanced way and lines up with 12 inch boring patterns on appliance fronts. Overall length is 12-3/4 inches, giving a bit of overhang beyond the 12 inch centers for a substantial hand grip on tall or heavy doors.
Key Brookridge Appliance Pull Details For Jobs
- The 12 inch center to center layout matches appliance drilling patterns that call for 12 inch pulls, which simplifies layout when aligning multiple tall fronts in a run.
- The 12-3/4 inch overall length provides extended grip area beyond the mounting points, which helps when opening larger or heavier appliance doors on built-in units.
- The 1-3/4 inch projection sets the pull off the face of the panel, giving fingers clearance behind the bar so hands can grab from different angles on tall doors.
- The 27/32 inch width creates a visible bar across the appliance front, which makes the pull easy to spot and operate on large panels without looking oversized.
- The 19/32 inch base width gives each mounting foot a defined footprint, which visually anchors the pull on wide appliance faces and pairs cleanly with other Brookridge pieces.
- The Verona Bronze finish on zinc ties into other Verona Bronze decorative hardware, which helps maintain a unified finish across appliances, doors, and drawer pulls.
Appliance Pull Sizing And Front Panel Alignment
This Berenson Brookridge appliance pull uses a 12 inch center to center measurement, which locates mounting holes exactly 12 inches apart for straightforward drilling on appliance panels or large cabinet faces. With a 12-3/4 inch overall length, the pull extends slightly beyond the boring centers on both sides, which centers the grip visually and helps it sit proportionally on tall or wide panels. The 1-3/4 inch projection stands the pull off the door enough to give space between hand and panel, which aids comfortable operation on full-height appliance fronts. The 27/32 inch bar width and 19/32 inch base width define the profile against the panel, which contributes to a balanced look when this pull is aligned with other Berenson Brookridge pieces in the same installation.
Using This Verona Bronze Appliance Pull In Projects
Where This Berenson Appliance Pull Works Well
The Berenson Brookridge Series Verona Bronze 12 inch center to center appliance pull is part of the Brookridge collection, so it fits projects that already use Brookridge handles and pulls on surrounding cabinetry. Its transitional style makes it suitable for designs that mix clean lines with softer details, which is common on modern kitchens with classic elements. As an appliance pull, its 12 inch center to center dimension suits wider appliance fronts where a standard cabinet pull would feel undersized. The Verona Bronze finish coordinates with other Verona Bronze decorative hardware and moldings, which helps tie together panel-ready refrigerators, dishwashers, and tall pantry doors in one finish story.
Details That Support Consistent Pull Layouts
The defined 12 inch center to center measurement on this appliance pull allows consistent hole spacing across multiple appliance and tall cabinet fronts, which supports straight sightlines in longer runs of panels. Its 12-3/4 inch overall length maintains equal reveal beyond the mounting holes, which helps installers line up grips visually even when door widths change. The 1-3/4 inch projection and 27/32 inch width combine to create a handhold that feels substantial relative to large panels, which can aid comfortable use on tall units. The 19/32 inch base width at each foot provides a clear reference for aligning bases parallel to door edges, which supports precise placement when matching other Berenson Brookridge pulls and handles in the same Verona Bronze finish.
Berenson Brookridge Appliance Pull Buyer Questions
What is the center to center size on this appliance pull?
The Berenson Brookridge appliance pull has a 12 inch center to center dimension, which sets the mounting holes 12 inches apart for appliance fronts that specify this boring size.
What is the overall length of the Berenson 2637-10VB-P pull?
The Berenson 2637-10VB-P appliance pull has an overall length of 12-3/4 inches, so it extends slightly beyond the 12 inch hole spacing and offers a longer gripping surface.
How far does this Brookridge appliance pull project from the panel?
This Brookridge appliance pull has a projection of 1-3/4 inches, which spaces the handle off the panel to give finger clearance on larger appliance or cabinet fronts.
What material and finish does this appliance pull use?
The appliance pull is made from zinc with a Verona Bronze finish, giving a metal base with a bronze-colored surface that coordinates with Verona Bronze decorative hardware.
What style is the Berenson Brookridge Verona Bronze pull?
This Berenson Brookridge pull is described as transitional style, so its form suits projects that combine traditional and contemporary cabinet or appliance panel designs.
What are the width and base dimensions on this pull?
The appliance pull has a width of 27/32 inch and a base width of 19/32 inch, creating a defined bar and foot size that supports a balanced look on wide panels.
Selecting This Pull For Appliance Front Projects
The Berenson Brookridge Series Verona Bronze 12 inch center to center appliance pull provides a transitional zinc design sized for wider appliance and tall cabinet fronts. With its 12-3/4 inch overall length, 1-3/4 inch projection, and Verona Bronze finish, it aligns visually and dimensionally with Brookridge collection hardware throughout the space. For projects using Verona Bronze decorative hardware and needing a 12 inch center to center appliance pull, this model brings the collection look onto panel-ready appliances and tall doors with consistent sizing.