Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Brookridge brushed nickel cabinet knob is a Berenson Brookridge Series knob designed for cabinet and furniture projects where a transitional style is needed. The knob has a 1-9/32 inch diameter that gives installers a defined hand grip while staying compact on the door or drawer face. Its 1-7/32 inch projection sets the hand clearance off the surface so fingers can pull comfortably without contacting the panel edge. The 1-9/32 inch width matches the diameter, giving a balanced round profile that lines up cleanly across multiple fronts. A 1/2 inch base steps the knob down to the door, helping the footprint sit neatly within narrow rail or stile layouts. The brushed nickel finish keeps reflections muted, which helps hardware visually blend across a run of cabinets under varied lighting. Material is zinc, giving the knob a solid, consistent casting for repeated everyday use in residential or light commercial cabinetry.
This Berenson Brookridge Series cabinet knob uses a 1-9/32 inch diameter, so layout spacing can be measured around a clear, repeatable size. With a projection of 1-7/32 inch, the knob stands off the door or drawer at a distance that works with most standard cabinet overlay depths. The 1-9/32 inch width keeps the knob profile round and symmetrical, which helps keep centerlines consistent across a full run. At the mounting surface, the 1/2 inch base concentrates the footprint, allowing installers to position the knob confidently between rail edges or panel details. The specified screw size of 8-32 by 1 inch ties this knob to a common cabinet knob thread, supporting straightforward installation into prepared fronts.
The Berenson Brookridge Series knob is part of Berenson Corporation decorative hardware in the knobs class, so it is suited for cabinet and furniture fronts that call for a defined pull point. Its transitional style bridges traditional and modern cabinet designs, which helps when projects blend simple door profiles with more detailed trim. The 1-9/32 inch diameter and matching width give a round pull that works on both doors and drawers without looking oversized on smaller faces. Brushed nickel finish coordinates with many brushed nickel hinges and pulls, supporting consistent visual hardware runs in kitchens, baths, or built-in casework. Because the base is 1/2 inch, the knob can be used on narrower stiles where larger bases would crowd panel lines.
The 1-9/32 inch diameter on this Brookridge knob lets installers set center points with a known outer reach, which is useful when laying out multiple fronts so reveals remain visually even. A 1-7/32 inch projection gives predictable hand clearance, aiding installers who align knob depth with adjacent pulls or appliance handles. The 1/2 inch base transitions from the knob body to the door, helping the hardware sit flat on typical cabinet surfaces. Zinc material construction supports a consistent thread engagement with the specified 8-32 by 1 inch screw size, which assists when driving fasteners to a uniform torque across a job. As a Berenson Brookridge Series knob, it aligns with the collection for projects that repeat the same style throughout multiple rooms or phases.
The Berenson Brookridge knob has a 1-9/32 inch diameter, 1-9/32 inch width, 1-7/32 inch projection, and a 1/2 inch base, giving installers clear sizing for layout and clearance planning.
The 1-7/32 inch projection holds the knob off the surface so fingers can wrap behind it, which supports comfortable pulling on doors and drawers in daily use.
The Brookridge Series knob is made from zinc, which provides a solid cast body and consistent threading at the mounting point for cabinet installation.
This knob has a brushed nickel finish, giving a muted metallic look that coordinates with other brushed nickel decorative hardware on cabinets.
The specified screw size is 8-32 by 1 inch, so the knob is set up around a standard cabinet knob thread for straightforward mounting into prepared fronts.
The Brookridge knob is described as transitional style, so it works across cabinets that combine simple door profiles with more detailed decorative molding.
The Berenson Brookridge Series brushed nickel knob brings a 1-9/32 inch round profile, 1-7/32 inch projection, and 1/2 inch base into a single zinc part, making layout and mounting repeatable across a run of cabinets. Its transitional style and brushed nickel finish help hardware lines stay consistent from room to room, while the 8-32 by 1 inch screw specification ties into standard cabinet knob threading. For projects needing coordinated decorative hardware with clear dimensions and a familiar installation interface, this Brookridge brushed nickel cabinet knob fits directly into a structured cabinet hardware plan.
