Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This plastic drawer side spacer is a screw-on fitting for the Salice F70 undermount slide series that compensates for a mismatch between the drawer box side thickness and the slide's designed fit, keeping the slide properly seated and the drawer running true.
Undermount slides are engineered around an exact drawer box specification: side thickness, box width, and rear notch all have to match the slide's design. When a drawer box side is thinner than the F70's design target, the locking device and slide runner sit at the wrong height and the drawer front cannot be adjusted correctly. This spacer restores the correct geometry so the F70 slide seats as intended and the locking device engages cleanly.
The most common scenario is a shop running a mix of drawer side thicknesses across cabinet lines, or a replacement situation where the new box was cut to a different thickness than the original. Rather than rebuilding the box or swapping slides, the spacer corrects the fit at the slide.
The spacer is molded plastic, which keeps it dimensionally stable in the dry indoor environment of a finished cabinet. Screw-on attachment means it is fixed to the drawer side before the slide is installed, and it will not shift or work loose during normal drawer use. Plastic also means the part adds no meaningful weight to the assembly.
Cabinet shops running the Salice F70 undermount system will find this spacer useful any time a drawer box arrives or is built at a side thickness that does not match the slide's nominal design. Having a stock of spacers on hand prevents a thickness mismatch from becoming a production delay. Installers doing replacement or retrofit work with F70 slides in existing casework will also reach for this part when the original box dimensions do not carry over exactly to the new installation.
This part is specified for the Salice F70 series. Salice's other undermount programs use their own fittings and accessories, and parts from different series are not interchangeable.
The 76mm figure is the thickness value listed for this part in the product attributes. If you are unsure whether this spacer matches your drawer box thickness situation, confirm against the Salice F70 installation specification before ordering.
The spacer is a screw-on part, but specific screw size and count are not listed in the product data. Follow the Salice F70 installation guide for the correct fastener.
The sold-as quantity is not confirmed in the product data. Check the pack quantity shown on this page before ordering, and plan on one spacer per drawer side where the fit requires it.
A single small spacer is often the difference between a drawer that adjusts cleanly and one that binds, tilts, or refuses to seat on its locking device — keep a supply on hand and the F70 system will run exactly as Salice designed it.
Sold In: 1 Each