Hickory Hardware Veranda 6-5/16" (160 mm) Center to Center Satin Nickel Pull, H077865SN

Hickory Hardware Veranda Series Pull For Cabinets

Hickory Hardware Veranda Series pull is a 6-5/16 inch (160 mm) center to center satin nickel pull that provides a defined handle span for consistent cabinet layouts. The 160 mm center to center dimension sets your drilling pattern, which supports repeatable hole locations across banks of doors and drawers. The satin nickel finish defines the visual look of the pull, giving projects a specific color and sheen to coordinate with other hardware. The gentle arc of the pulls creates a soft, curved grip area that affects both hand feel and the visual line across the front of the cabinet. Subtle details in the Veranda Series pull are meticulously composed, so the profile and transitions are already resolved for a finished appearance on installation. The product is identified by manufacturer part number H077865SN, which helps align this pull with existing Hickory Hardware Veranda Series jobs and reorders.

Key Veranda Series Pull Details For Projects

• The 6-5/16 inch (160 mm) center to center dimension sets a clear drilling distance between fasteners, helping installers lay out consistent handle spacing on face frames and slab fronts across multiple openings.
• The satin nickel finish defines a specific metallic tone and surface look, allowing cabinet runs to match this pull with hinges or other decorative cabinet hardware that share a similar nickel appearance.
• The gentle arc of the pulls creates a curved gripping surface, which influences hand clearance and the way the pull sits against the door or drawer face for smooth operation.
• The subtle details of this collection are meticulously composed, giving the pull a settled profile so cabinets present a deliberate, contemporary hardware style once mounted.
• The Hickory Hardware Veranda Series lineage, under the Belwith Keeler brand, links this pull to a long-standing decorative cabinet hardware offering that supports continuity across multiple projects.

Installation Use Of The 160mm Center To Center Pull

The 160 mm center to center measurement on this Hickory Hardware Veranda Series pull defines where mounting points land on the door or drawer, so jigs and templates can be set around that number. This known span helps installers run the same layout across a room, reducing layout variation between cabinets. All essential mounting hardware is referenced as included for an effortless installation in the web description, which directly addresses fastening needs during mounting. The gentle arc shape affects where the pull stands off the face, guiding where to position it for finger clearance on thicker door profiles. With the satin nickel finish already applied, there is no finishing step on-site, so once the holes follow the 160 mm pattern, the pull can be mounted and the front is visually complete.

Using This Satin Nickel Pull On Cabinet Jobs

Where The Veranda Series Satin Nickel Pull Fits

This Hickory Hardware Veranda Series 6-5/16 inch (160 mm) center to center satin nickel pull is categorized as decorative cabinet hardware and a handle and pull, so it is suited to doors and drawers that need a functioning grip point. The satin nickel finish ties it to projects that call for a nickel-toned appearance, bringing that color across entire cabinet runs. As part of the Veranda Series, the pull carries the same design language as the rest of the collection, which matters when multiple hardware points must appear coordinated on a single installation. The gentle arc of the pull supports use on both vertical and horizontal orientations, so the same part number H077865SN can be applied across upper cabinets, base cabinets, and drawer stacks where this style is desired.

Why The 160mm Pull Design Supports Consistent Results

The defined 160 mm center to center drilling distance on this pull establishes a repeatable standard that helps installers produce uniform handle locations from one cabinet to the next. That known span pairs with jigs and boring equipment set to metric measurements, saving time on layout conversion. The meticulously composed subtle details mean the transitions, edges, and curves are already resolved, so once aligned to the drilling pattern, the pull sits correctly without further shaping. The gentle arc of the pulls gives a soft elegance that also translates to a comfortable hand grip, supporting everyday opening and closing loads. As a product from Hickory Hardware, within the Belwith Keeler brand, this pull fits into established decorative cabinet hardware programs, which helps maintain visual continuity and part traceability through the H077865SN identifier when adding to or refreshing existing installations.

Common Questions About The H077865SN Cabinet Pull

Selecting This 160mm Satin Nickel Pull For Work

The Hickory Hardware Veranda Series 6-5/16 inch (160 mm) center to center satin nickel pull H077865SN combines a defined drilling span with a gentle arc design, giving cabinet projects a consistent layout and a contemporary profile. With its satin nickel finish and composed detailing, this Belwith Keeler decorative cabinet hardware piece serves jobs that call for a coordinated nickel look across doors and drawers. When a project specification points to the Veranda Series or to the H077865SN identifier, this pull delivers that exact appearance and hole spacing on new installations or expansions.