Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
The Karran Select SU75-PK1 is a 16-gauge stainless steel undermount kitchen sink with a single bowl sized to drop beneath a 36-inch base cabinet. It installs under granite, quartz, or solid surface countertops for a clean, rimless look at the counter surface.
One large, uninterrupted bowl handles oversized cookware, sheet pans, and large cutting boards in a way that divided basins cannot. At 9-1/2 inches inside depth, the bowl takes a stockpot without the rim sitting too close to the faucet, and the 30-inch inside length leaves room to maneuver without crowding the sides. This is a practical configuration for a primary kitchen sink where the daily load is heavy and the variety of items coming through is wide.
Stainless steel gauge describes the thickness of the metal: 16-gauge is thicker than the 18-gauge steel common in builder-grade sinks, which gives the bowl a more solid feel underhand and reduces the resonance that thinner steel produces when water hits it. The stainless finish here is the natural brushed surface of the steel itself, a neutral tone that coordinates with a wide range of kitchen hardware without requiring a specific finish match. Because it mounts below the countertop, the sink rim stays out of sight and the counter material runs cleanly to the bowl edge, which also makes wiping debris directly into the sink straightforward.
This sink is the right call for a kitchen remodel or new build centered on a granite, quartz, or solid surface countertop where undermounting is already planned. The 32-inch overall length lands in the standard range for a single-bowl sink in a 36-inch cabinet, so it suits the most common primary-sink cabinet width without requiring a custom cutout. Cabinet shops specifying sink bases, designers selecting fixtures for a full kitchen package, and contractors sourcing for a countertop fabrication job will find the 16-gauge spec and standard drain opening straightforward to work with. This is an indoor sink for dry installations; it is not rated for outdoor or marine applications.
It is designed for undermount installation into granite, quartz, and solid surface countertops. The countertop fabricator handles the cutout and bonding during installation.
Yes. Lower gauge means thicker steel. The 16-gauge walls are more rigid and produce less resonance than thinner 18-gauge sinks, which is noticeable when the sink is fully installed and in daily use.
The sink requires a minimum 36-inch wide base cabinet. The overall sink length is 32 inches, and the inside bowl is 30 inches long.
No. This is an undermount-only sink. It is not designed for drop-in or top-mount installation.
Choose this sink when the job calls for a 16-gauge single-bowl stainless undermount in a 36-inch cabinet, with a drain opening and dimensions that keep the rough-in simple.
Sold In: 1 Kit
