Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
adjustable wall bed mechanism kit describes a patented adjustable mechanism that lifts and lowers a horizontal wall bed designed for queen and full size beds, so installers can build a space-saving bed that operates smoothly within the specified dimensions and mattress range. The mechanism is designed for horizontal opening, which positions the cabinet width-wise on the wall, helping layouts where ceiling height is limited but wall width is available. Compatibility with both queen and full sized beds gives flexibility for projects where room size or client preference may dictate mattress width while keeping the same mechanism approach. The kit is identified by manufacturer part number 2786008, which ties directly to the Create A Bed system for this horizontal configuration. Placement in the bed hardware category clarifies that this mechanism is intended as the operating hardware at the core of a wall bed project.
Finished horizontal cabinet dimensions for the queen layout are 68-5/16 inches high by 86 inches wide by 15-7/8 inches deep, with a 67 inch projection when the bed is down, so installers can size the cabinet face and floor clearance around these values. For the full size configuration, finished horizontal cabinet dimensions are 62-5/16 inches high by 81 inches wide by 15-7/8 inches deep, with a 61 inch projection when the bed is down, which suits slightly smaller rooms that still follow the same construction method. The horizontal opening format combined with these exact dimensions helps plan wall placement, flooring transitions, and adjacent casework so the extended projection clears other elements.
This Create A Bed wall bed kit is designed for queen and full sized beds using a horizontal opening, so it fits projects where wall width can accept either an 86 inch or 81 inch finished cabinet and the room benefits from a lower cabinet height. The queen layout at 68-5/16 inches high and the full layout at 62-5/16 inches high support use under soffits, windows, or angled ceilings that would interfere with taller vertical systems. The fixed depth of 15-7/8 inches for both sizes keeps cabinet carcass design consistent, which simplifies cutting, machining, and repeat builds for shops standardizing on this hardware set. Projections of 67 inches for queen and 61 inches for full when the bed is down define clear floor space, so room furniture and walkways can be planned to avoid interference during operation.
The patented adjustable mechanism allows effortless lifting and lowering, which means the installer can tune motion within the recommended mattress weight ranges so the bed moves in a controlled way rather than feeling either too heavy or too aggressive. Recommended mattress weight for queen is 65 pounds to 80 pounds, and for full it is 50 pounds to 65 pounds, so when mattresses fall within these windows the gas pistons and mechanism can balance the load for smoother handling. Recommended mattress size for the queen configuration is 60 inches by 80 inches, and for the full configuration it is 54 inches by 75 inches, which aligns the mattress footprint to the cabinet interior so clearances stay predictable. Maximum mattress thickness of 12 inches, including pillow top, guides mattress selection so the bed closes properly into the 15-7/8 inch deep cabinet without overextending the front plane. Highest quality gas pistons provide smooth, safe, quiet, and long lasting operation, benefiting daily use where controlled speed and reduced noise matter in bedrooms, guest rooms, or multi-use spaces. A limited lifetime warranty on mechanism components supports long-term service expectations, making this mechanism suitable for installations where the wall bed will see regular cycling over many years.
This Create A Bed mechanism is designed for queen and full sized beds, so projects can be built around either a 60 x 80 inch queen mattress or a 54 x 75 inch full mattress.
The horizontal opening uses wider, lower cabinet dimensions, so layouts rely on wall width while benefiting from finished cabinet heights of 68-5/16 inches for queen and 62-5/16 inches for full.
The mechanism is specified for queen mattresses from 65 to 80 pounds and full mattresses from 50 to 65 pounds, which keeps operation within the balancing range of the gas pistons.
The system is designed for a maximum mattress thickness of 12 inches, including pillow top, so the mattress fits the 15-7/8 inch deep cabinet when closed.
Highest quality gas pistons provide smooth, safe, quiet, and long lasting operation, which supports controlled lifting and lowering that feels predictable in recurring use.
The mechanism components carry a limited lifetime warranty, which supports long-term service expectations for the operating hardware in a completed wall bed installation.
This horizontal wall bed mechanism kit from Create A Bed combines a patented adjustable mechanism with highest quality gas pistons, so a properly weighted queen or full mattress can be balanced within the recommended ranges for repeatable lifting and lowering. The defined finished cabinet dimensions for both mattress sizes give clear height, width, depth, and projection targets, helping cabinet shops and installers design projects that fit their available wall width and floor space. With mattress size, mattress weight, thickness limits, and cabinet footprints all specified, this mechanism kit aligns well with projects that require predictable layout and dependable wall bed operation.
Sold In: 1 Kit
