Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Nylon Button Glide is a sliding door hardware component from EPCO that installs into a 1/4 inch diameter hole on the bottom of the door to support movement along a compatible track, which helps the door travel smoothly in its opening. This glide is designed for use on 1/2 inch or 3/4 inch doors, so it matches common cabinet and light door thicknesses in woodworking projects. The part uses a button-style nylon body, which provides a low-friction contact point with the track so the door can move without dragging on the cabinet or floor. EPCO identifies this component as manufacturer part number 33, which lets you match it directly to track and hardware layouts that call for this exact part. Using 2 glides per door distributes the load at the bottom edge, which supports stable travel in the track.
This EPCO Nylon Button Glide installs into a 1/4 inch diameter hole on the bottom of the door, so a 1/4 inch bore through the lower edge provides the seating point for the button body. The part is intended for 1/2 inch or 3/4 inch doors, which means those door thicknesses give enough material around the hole to support the glide while keeping the contact point correctly positioned in line with the matching track. For each door, the setup uses 2 glides, so you place one near each end of the door bottom to carry the door weight evenly along the run of the selected EPCO-compatible track.
The EPCO Nylon Button Glide, identified as manufacturer part number 33, is classified under sliding door hardware, so it is intended to function as a bottom glide where a door runs along a track. It installs into a 1/4 inch diameter hole on the bottom of a 1/2 inch or 3/4 inch door, which positions the glide directly at the lower edge where it can contact the track surface and carry the load as the door moves. The glide is specified for use with EPCO 212, 234, 312-M, or 334-M tracks, so those track series provide the running surface geometry that matches the nylon button profile. Using 2 glides per door creates two stable bearing points that help the door follow the track path without binding. Wurth Baer Supply lists this part in the sliding door hardware product class, which aligns it with cabinet and similar sliding applications.
Because the Nylon Button Glide is designed specifically for a 1/4 inch diameter mounting hole, installers can rely on that exact drill size to create a tight, repeatable fit that resists wobble during door movement. The suitability for 1/2 inch or 3/4 inch doors means each of those common thicknesses provides sufficient material around the hole, which helps the glide stay seated and aligned under everyday loads. Specifying 2 glides per door defines the load path at the bottom edge, so the door weight is shared between both contact points, which supports smooth travel along 212, 234, 312-M, or 334-M tracks. The use with these specific EPCO track numbers ties the glide to known track profiles, so the nylon button can ride along the designed running surface with consistent contact. Being sold by Wurth Baer Supply as sliding door hardware connects this part directly to professional woodworking supply chains.
The Nylon Button Glide is designed for 1/2 inch or 3/4 inch doors, so it fits common cabinet and lightweight sliding doors that match those thicknesses in typical woodworking projects.
The EPCO Nylon Button Glide installs into a 1/4 inch diameter hole on the bottom of the door, placing the glide at the lower edge where it can contact the sliding track surface.
This Nylon Button Glide is specified to use 2 per door, so the bottom edge has two bearing points that help distribute the door weight and support controlled movement along the track.
The sliding door nylon button glide is for use with 212, 234, 312-M, or 334-M tracks, so these EPCO track series provide the matching running surface for the glide.
The Nylon Button Glide mounts in a 1/4 inch diameter hole on the bottom of the door, giving a defined drill size that sets the fit and position of the glide.
This EPCO nylon button glide is offered by Wurth Baer Supply, a specialty wholesale distributor to the woodworking industry that supplies sliding door hardware.
The EPCO Nylon Button Glide with manufacturer part number 33 gives you a defined mounting hole size, supported door thickness range, and specific track compatibility using 212, 234, 312-M, or 334-M tracks, so it slots directly into sliding door layouts that match those parameters. Ordering from Wurth Baer Supply in both broken and full box quantities lets you align this glide with repair jobs or production runs that use 2 glides per door across matching door and track combinations.
Sold In: 1 Each