
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
plastic clip guide 771 is a plastic clip guide for glass doors that fits over the top edge of the glass, so the panel tracks in the upper guide instead of rubbing directly on metal. This setup supports smoother sliding action and reduces noise when the door moves. The guide is classified as sliding door hardware, so it is intended for use in sliding door systems rather than general-purpose glazing. The product is identified as EPCO part 771, which lets installers match it to drawings or existing parts in the same series during service work. The clip design fits over 1/4 inch doors, so it is sized for common glass thickness used in many interior sliding applications. Because it operates in the upper guide, the clip helps the glass track in a controlled path, supporting consistent operation over repeated cycles.
The SAP description identifies this part as a plastic clip guide for glass with an overall length of 1.125 inches, so each clip covers a short section of the door edge, giving discrete support points along the top of the glass instead of a continuous cap. The stated width of 0.45 inches defines how much room the guide occupies across the track interface, which matters when aligning it within an upper channel profile. The height of 0.31 inches describes the vertical dimension of the guide body, influencing how the glass-plus-clip combination sits relative to the upper track and any clearances built into the sliding system.
The EPCO plastic clip guide 1/4 inch doors, 771, is designed for doors with a 1/4 inch glass top edge, so it targets builds that use that glass thickness in sliding configurations. Because it fits over the top of the glass, the clip becomes the interface between the panel and the upper guide, so the glass engages the track through plastic instead of direct glass-to-metal contact. The 1.125 inch length means each clip spans a compact section of the door, allowing multiple guides to be spaced along the head of wider panels if the sliding system design calls for several support points. The 0.45 inch width gives the guide a defined footprint where it rides in the upper guide, influencing how it locates laterally within the track profile.
The 0.31 inch height sets how far the clip body projects as it sits in the upper guide, affecting how the door hangs relative to the track and how clearances are taken up as the door moves. When the clip fits over the glass and operates in the upper guide, it promotes silent operation because the sliding contact happens through plastic rather than exposed glass edges, which helps sliding assemblies feel smoother in use. Being part of the sliding door hardware class, this EPCO 771 guide is shaped for guided motion rather than static support, so its dimensions and over-glass fit are oriented toward consistent tracking along an upper channel. The defined length, width, and height allow installers to visualize its interaction with the upper guide and plan clip placement for even support across the door.
The EPCO plastic clip guide 1/4 inch doors, 771, fits over the top of 1/4 inch glass doors, so it is sized for that glass thickness in sliding applications.
The EPCO 771 guide fits over the top of the glass for silent operation in the upper guide, so the glass bears on plastic, reducing sliding noise in the track.
The plastic clip guide for glass has a 1.125 inch length, so each clip supports a short section of door edge, allowing multiple clips to be spaced along wider panels.
The 0.45 inch width and 0.31 inch height define the guide footprint and projection in the upper guide, helping installers match it to channel clearances and edge positions.
This EPCO 771 plastic clip guide for glass serves as an upper guide interface, so the glass door tracks against the plastic clip instead of directly contacting the guide channel.
The manufacturer part number 771 uniquely identifies this plastic clip guide for glass, allowing installers to reorder the same guide when replicating or servicing matching sliding systems.
The EPCO plastic clip guide for glass, part 771, combines an over-glass design with 1.125 inch length and 0.45 inch by 0.31 inch body dimensions, giving a defined interface for 1/4 inch glass sliding doors in upper guides. Because it is sold each, quantities can be matched to the number of support points planned along the door edge for a particular sliding layout. For projects using 1/4 inch glass panels in guided upper tracks, this dedicated sliding door hardware component provides a shaped plastic contact surface that supports quieter, more controlled sliding movement.
Sold In: 1 Each