
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Edge moulding for 1/4 in glass from EPCO gives a dedicated trim profile for glass used in sliding door assemblies, so installers have a predictable way to protect exposed vertical glass edges. The bright annealed stainless construction delivers a stainless steel profile, which suits hardware environments where matching metal finishes and corrosion resistance are important. This edge moulding is identified as sliding door hardware, so it fits directly into typical sliding glass door assemblies rather than improvised trim solutions. The part is 6 ft long, which helps span common door heights with a single continuous piece, reducing joints along the edge. The 9/32 in width and 5/16 in height dimensions define the channel envelope around the glass edge, so layout around adjacent tracks, guides, and stiles can be planned accurately.
This EPCO stainless edge moulding is listed for use on the vertical edge of glass in sliding glass door assemblies, so its profile is oriented around that edge rather than top or bottom locations. The sizing for 1/4 in glass means the moulding interface is tailored to that glass thickness, which helps align the glass pane within the moulding while coordinating with surrounding sliding door hardware components. The 9/32 in width and 5/16 in height define how far the profile extends from the glass, which influences how closely the glass can run to adjacent rails or mullions. The 6 ft length gives a continuous piece for typical residential or commercial sliding door heights, simplifying layout and cutting work on site.
This EPCO edge moulding bright annealed stainless for 1/4 in glass is specified for the vertical edge of glass in sliding glass door assemblies, so it is suited to doors where exposed glass edges run in line with tracks and guides. The stainless steel construction positions it within the builders hardware and sliding door hardware category, aligning it with other metal components used in these assemblies. With a 6 ft length, the moulding supports door designs approaching that height, allowing installers to cut the profile to match exact glass size while maintaining a single piece per edge. The 9/32 in width and 5/16 in height give a compact trim size around the glass, supporting layouts where glass edges pass close to jambs or overlapping panels.
The 1/4 in glass designation ties this edge moulding directly to a widely used glass thickness, which simplifies repeating the same detail across multiple panels in a project that all share that glass size. The stainless steel material offers a consistent formable metal profile, helping hold a stable edge line along the glass where it interfaces with sliding door hardware components. The 9/32 in width limits how far the moulding projects from the glass face, which matters when two glass doors slide past each other on a tight centerline. The 5/16 in height sets how much of the glass edge is covered, guiding how the glass is positioned when preparing the door assembly. The 6 ft length gives extra material for trimming to final size, so cut ends can be squared and fit precisely to the glass height.
This EPCO edge moulding is sized for 1/4 in glass, so it suits door designs using that glass thickness in sliding glass door assemblies.
This stainless steel edge moulding is specified for use on the vertical edge of glass in sliding glass door assemblies, so it aligns with the door's upright edges.
The EPCO 2030 edge moulding is 6 ft long, providing enough length to run along typical sliding glass door heights with room for trimming.
This glass edge moulding has a 9/32 in width and 5/16 in height, defining a compact profile around the glass edge for planning clearances.
This EPCO edge moulding is stainless steel with a bright annealed stainless finish, providing a metallic look that coordinates with other stainless sliding door hardware.
This moulding is categorized as sliding door hardware, so it is intended to work as part of a sliding glass door assembly around the glass edge.
The EPCO edge moulding bright annealed stainless for 1/4 in glass gives a defined vertical edge solution within sliding glass door hardware. With stainless steel construction, 9/32 in width, 5/16 in height, and a 6 ft length, it supports clean glass edges and consistent layout across sliding glass door projects.
Sold In: 1 Each