Edge Moulding Bright Annealed Stainless Steel for 1/4" Glass

Edge Moulding For 1/4 In Glass Protection

Edge moulding for 1/4 in glass provides a protective stainless channel around the glass edge, so the vertical edge in a sliding glass door assembly gains a defined, durable boundary during operation. The EPCO bright annealed stainless steel construction creates a hard metal surface along the glass edge, which helps the door transition past adjoining parts without the glass edge bearing contact. The 6 ft length gives coverage along tall glass door edges in a single continuous run, which reduces joint points along the edge line. The 9/32 in width sets a compact profile around the glass, so the glass edge trim stays tight to the panel. The 1/2 in height provides channel depth around the edge, which helps the glass sit consistently within the moulding for stable positioning.

Key Stainless Edge Moulding Work Advantages

• The bright annealed stainless steel material forms a smooth metallic surface on the glass edge, which helps the vertical edge tolerate repeated sliding contact in door assemblies.
• Design for 1/4 in glass targets a common glass thickness, so the moulding channel engages the edge with a predictable fit in sliding glass door hardware layouts.
• The 6 ft length spans typical door-height glass panels, which allows long vertical edges to be finished in one piece for consistent coverage.
• The 9/32 in width keeps the edge profile narrow, which helps the moulding sit within tight clearances in builders hardware installations.
• The 1/2 in height creates a deeper channel on the glass edge, which supports stable alignment of the glass inside the moulding along the full run.

Stainless Edge Moulding Fit And Alignment Use

This protective edge moulding for 1/4 in glass is set up for use on the vertical edge of glass in sliding glass door assemblies, so it aligns naturally with how door panels travel in their tracks. The stainless steel body maintains its shape along the 6 ft length, which supports straight runs on tall vertical edges. The 9/32 in width and 1/2 in height define the channel proportions around the edge, which guides how the glass locates inside the moulding during assembly. Because the moulding is part of sliding door hardware, its dimensions are tuned for builders hardware conditions where the glass edge passes close to adjoining components.

Using EPCO Edge Moulding In Door Assemblies

Where This Stainless Edge Moulding Is Applied

The EPCO edge moulding bright annealed stainless steel for 1/4 in glass is used on the vertical edge of glass in sliding glass door assemblies, so it directly lines the working edge that moves with the door. As a piece of sliding door hardware in the builders hardware category, it fits into layouts where glass panels interact with tracks, guides, and stops along a vertical edge. The 6 ft length serves tall glass panels commonly found in these assemblies, allowing the moulding to run the full height so the working edge is treated uniformly. The 9/32 in width defines how much the moulding projects from the glass, so it can sit within the clearances designed into the surrounding door hardware.

Why These Edge Moulding Details Support Results

The 1/2 in height of this stainless steel moulding creates a taller channel around the glass edge, which helps keep the 1/4 in glass seated consistently during assembly and use. The bright annealed stainless finish yields a smooth, even surface along the contact path, which supports steady sliding action where the finished edge meets other door hardware. Because this part is classified as sliding door hardware and is specified for use on the vertical edge of glass in sliding glass door assemblies, the profile is sized to cooperate with typical builders hardware tolerances. The 6 ft continuous length reduces transitions along the edge, which matters when aiming for a straight, uniform edge line that tracks cleanly in the system.

Common Questions About EPCO Edge Moulding 2031

Select Edge Moulding For 1/4 In Glass Doors

The EPCO edge moulding bright annealed stainless steel for 1/4 in glass offers a defined 9/32 in wide by 1/2 in high channel over a 6 ft run, so the vertical edge in a sliding glass door assembly gains consistent coverage. As sliding door hardware for the builders hardware trade, it is set up specifically for the vertical edge of glass in sliding glass door assemblies. For projects using 1/4 in glass panels that travel on hardware, this moulding provides a stainless steel edge profile sized for that thickness and height range.