Glass Clip Retainer 1.25"L from EPCO is a mirror and glass clip that holds glass or mirror panels using a compact 1.25 inch long retainer, which helps secure panels while keeping the holding points discreet on finished work. The product is classified by Wurth Baer Supply as part of Mirror & Glass Clips in the Fasteners | Mirror Clips category, so it serves as a fastening component purpose-built for glass and mirror installations rather than a general hardware piece. The SAP description specifies GLASS CLIP RETAINER,1.25INL,POL CHROME, which confirms that this retainer is sized at 1.25 inches and finished in polished chrome, giving a bright metal look that visually matches common chrome hardware on cabinets, vanities, and commercial fixtures.
This EPCO Glass Clip Retainer 1.25"L functions as a mirror and glass clip within the Fasteners | Mirror Clips category, so it is used as part of the mounting system that keeps glass or mirror edges held against a supporting surface. The 1.25 inch length called out in both the product name and SAP description defines how much bearing surface the clip offers on the glass edge, shaping how many clips an installer may choose to distribute along an edge to achieve the desired holding pattern. The polished chrome detail in GLASS CLIP RETAINER,1.25INL,POL CHROME also affects installation appearance, because the visible portion of the clip will visually coordinate with polished chrome surroundings when the glass or mirror is mounted in bathrooms, furniture pieces, or commercial millwork.
The Glass Clip Retainer 1.25"L is identified by Wurth Baer Supply as a Mirror & Glass Clips product in the Fasteners | Mirror Clips category, so it is applied wherever a glass or mirror panel needs mechanical retention against a backing surface. In cabinetry or furniture, this mirror clip fastener helps hold small mirrors or glass panels as part of doors, display areas, or decorative panels, giving a defined hardware point instead of relying solely on adhesives. In commercial or residential wall-mount situations, its classification as a glass clip retainer means it supports the panel edges as part of a broader mounting layout, contributing to panel stability while presenting a compact visible profile around the perimeter. Because the product name emphasizes Glass Clip Retainer and its brand is EPCO, trades can align it with other EPCO mirror and glass clips when they want a consistent component style throughout a run of work. The polished chrome finish referenced in the SAP description makes this clip a practical choice in environments where other elements already use polished chrome, such as handles or plumbing trim, so the clip appearance does not distract from the overall design.
The explicit 1.25 inch length in GLASS CLIP RETAINER,1.25INL,POL CHROME sets a known retainer size, which helps installers plan clip spacing and edge coverage so every similar opening can be laid out the same way from job to job. The polished chrome designation means each EPCO glass clip retainer presents a bright, uniform surface, which is useful when several clips are aligned along a mirror edge and the visual rhythm of the hardware becomes part of the finished look. The Manufacturer Part # 2004-PC ties every order back to this specific configuration, which supports consistent replacement or expansion work because the same geometry and finish can be specified again later. Since Wurth Baer Supply lists it within the Mirror & Glass Clips class, users can group it in their internal standards as a dedicated mirror clip component, simplifying selection whenever a drawing or specification calls for a glass retainer clip 1.25 inch in polished chrome.
The Glass Clip Retainer 1.25"L is a mirror and glass clip in the Fasteners | Mirror Clips category, so it is used to retain glass or mirror panels as part of a mounting layout.
The 2004-PC glass clip retainer is specified as 1.25 inches long, which defines the bearing length on the panel edge and guides how many clips may be used per side.
This EPCO mirror clip fastener is described as POL CHROME in the SAP description, meaning it has a polished chrome finish that visually coordinates with other polished chrome components.
The Glass Clip Retainer 1.25"L is manufactured by EPCO, as listed by Wurth Baer Supply, which allows users to match it with other EPCO mirror and glass clips.
Manufacturer Part # 2004-PC is EPCO's identifier for this specific 1.25 inch polished chrome glass clip retainer, supporting accurate reorders and specification on project documents.
Wurth Baer Supply classifies it under Fasteners | Mirror Clips and the Mirror & Glass Clips product class, indicating its role as a dedicated mirror and glass retention component.
The EPCO Glass Clip Retainer 1.25"L, identified as GLASS CLIP RETAINER,1.25INL,POL CHROME and Manufacturer Part # 2004-PC, gives installers a clearly defined mirror and glass clip with a known 1.25 inch length and polished chrome finish. Its placement by Wurth Baer Supply in the Fasteners | Mirror Clips category and Mirror & Glass Clips product class ties it directly to glass and mirror retention tasks, rather than general hardware use. For projects that call for a consistent polished chrome mirror clip fastener across multiple panels or locations, this specific EPCO glass clip retainer offers a repeatable choice that aligns design appearance with functional glass and mirror holding.
Sold In: 1 Each