Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This EPCO 12-foot milled aluminum hanging rail is the raw stock for building file drawers from scratch or restoring existing file hardware. Cut it to your drawer's interior length, pair it with matching 1/2-inch hanging rail brackets, and the drawer carries standard hanging folders cleanly along both sides.
File drawer rail stock earns its place in two situations: new casework where hanging file capability is designed in from the start, and replacement work where original rails have bent, corroded, or gone missing on an existing cabinet. Because this rail comes in a 12-foot length, a shop building a bank of file drawers can cut multiple pairs from one piece rather than ordering pre-cut rails for each drawer. Pair the cut sections with 1/2-inch side-mount or cross-bar-mount hanging rail brackets to position the rails at the correct height inside the drawer box. The finished drawer handles standard letter-size hanging folders; confirm folder hook compatibility with the 1/2-inch rail height before ordering brackets.
The rail is milled aluminum in a Mill Aluminum finish — the natural, lightly worked surface left after the milling process, without anodizing or paint. Aluminum's resistance to surface corrosion makes it a practical choice for file drawers that see paper dust and the occasional humid storage room. The milled profile cuts with a standard fine-tooth blade or hacksaw and deburrs easily, so field cuts are clean without special tooling. Width and height are both 1/2 inch, consistent across the full 12-foot length.
Cabinet shops and office furniture builders use this rail when they need to produce file-capable drawers in volume without buying pre-cut, per-drawer hardware sets at retail pricing. Facilities and maintenance teams reach for it when an existing file cabinet needs a rail replacement and the original is no longer stocked as a service part. It also suits custom millwork projects — built-in home offices, legal file rooms, and shop record drawers — where the drawer dimensions do not match a packaged kit's fixed length.
It is sold as a single 12-foot length. A working file drawer requires one rail on each side, so order two rails per drawer and cut both to the same interior length.
Use 1/2-inch hanging rail brackets. Bracket height must match rail height so folder hooks seat correctly on the rail; a 3/4-inch bracket will leave this rail sitting too low in the bracket channel.
The rail itself is a profile — whether the drawer handles letter or legal folders depends on the inside width of the drawer box. Letter folders need roughly 12-1/4 inches of clear interior width; legal folders need about 15-1/4 inches. The rail mounts along the sides regardless of folder size.
A fine-tooth metal-cutting blade in a miter saw, circular saw, or hacksaw cuts the aluminum cleanly. Deburr the cut end with a file or fine sandpaper before mounting so folder hooks slide freely past the end.
Buying rail in a 12-foot length means fewer line items per project and more cuts per piece — a straightforward win for any shop building or refitting multiple file drawers in a single run.
Sold In: 1 Each