Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
EPCO 2-1/2 Joint Clamp is a LOK-LEVEL JOINT CLAMP that joins and levels wood tops and units absolutely flush without glue, dowels or splines, so you can pull seams tight using mechanical force instead of relying on adhesive alignment. The clamp design keeps the top from bowing, which helps you maintain a straight, even surface across the joint when you apply clamping pressure. A micrometer leveling adjustment is built into the clamp, letting you fine-tune the height of each side of the joint for a smooth transition between panels. The clamp is made of 10 gauge steel, over 1/8 inch thick, providing a solid body that resists deformation while you draw parts together. This EPCO joint clamp is part of the tite joint fasteners category, giving you a purpose-built option for creating tight, repeatable joints in wood tops and similar units.
This LOK-LEVEL JOINT CLAMP uses a micrometer leveling adjustment, which allows you to dial in the final joint height during installation rather than relying solely on initial cutting accuracy. The clamp joins and levels wood tops and units absolutely flush without glue, dowels or splines, so the installation workflow centers on positioning and tightening the clamp to pull the pieces into alignment. Because the top cannot bow under the clamp action, you can apply force to close the seam while maintaining a flat plane across the joint. The clamp is made of 10 gauge steel, over 1/8 inch thick, so the installer can apply working torque with confidence that the clamp body will carry joint loads through normal use of the connected tops or units.
This EPCO 2-1/2 inch joint clamp is described as a LOK-LEVEL JOINT CLAMP that joins and levels wood tops and units absolutely flush without glue, dowels or splines, so it is intended for applications where two wood sections must meet cleanly along a seam. In use, the clamp applies mechanical force to draw the edges together, giving you a tight, aligned joint between connected pieces. Because the description states the top cannot bow, the clamp is suited to situations where a flat, continuous surface across adjoining tops matters for function or appearance. Being classified under fasteners and further as tite joints and dog bones means this clamp serves as a structural joining component between pieces rather than simply acting as a light-positioning aid. The EPCO brand and 26-E part number identify this specific joint clamp pattern for repeat ordering on future projects that require the same joining method.
The built-in micrometer leveling adjustment gives this joint clamp a fine-tuning feature so an installer can adjust the relative height of connected wood tops and units during assembly, which supports smooth transitions along the joint line. This adjustment works with the core function of joining and leveling wood tops absolutely flush, so you can target a nearly continuous surface at the connection. Because the clamp prevents the top from bowing, the height adjustments you set with the micrometer feature act across a stable base instead of fighting distortion caused by the clamping action. The clamp is made of 10 gauge steel, over 1/8 inch thick, so the adjustment mechanism operates within a rigid housing that resists flex as you load the joint. As a tite joint fastener in the tite joints and dog bones product class, the EPCO 2-1/2 inch joint clamp 26-E provides a repeatable joining approach for similar wood-top and unit installations where consistent flush alignment is required across multiple units.
The EPCO 2-1/2 inch joint clamp joins and levels wood tops and units absolutely flush without glue, dowels or splines, creating a tight, aligned seam using mechanical clamping force.
The joint clamp uses a micrometer leveling adjustment to fine-tune the height of adjoining surfaces, helping match panel levels at the seam for a smooth, continuous top.
The joint clamp is made of 10 gauge steel, over 1/8 inch thick, giving it strength to handle clamping loads while keeping connected wood tops tight and stable in use.
The LOK-LEVEL joint clamp is described so that the top cannot bow, meaning its design applies force in a way that holds the joined tops flat across the seam.
This clamp is categorized under tite joints and dog bones and joins wood tops and units, so it suits applications needing tight, flush joints between wood sections.
Part number 26-E identifies this specific EPCO LOK-LEVEL JOINT CLAMP pattern, helping installers and shops reorder the same joint fastener for consistent projects.
The EPCO 2-1/2 inch joint clamp, listed as a LOK-LEVEL JOINT CLAMP, joins and levels wood tops and units absolutely flush without glue, dowels or splines, so it suits projects that demand clean seams. With a micrometer leveling adjustment, the clamp lets you tune surface height where tops meet, while its 10 gauge steel body, over 1/8 inch thick, carries clamping loads between connected sections. As part of the tite joints and dog bones product class, this EPCO 26-E joint clamp provides a defined fastening method for assembling wood tops and units that need a flat, even joint line.
Sold In: 1 Each