Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
12' oil rubbed bronze shoe moulding from EPCO provides a continuous base profile for 1/4 inch glass in sliding door hardware runs, so long glass panels sit securely along the bottom edge. The 12 FT long length allows extended straight runs on doors or panels, which helps reduce joints where movement and rattling can start. The 1/4 inch glass press fits into the top of the shoe using 2021 glazing vinyl, creating a friction-held connection that keeps glass stable without separate clamps. This press-fit method supports a consistent reveal along the glass edge, which is important when aligning multiple sliding panels. The 0.438 inch width keeps the shoe compact along the track line, so it ties into surrounding hardware layouts in tight door frames. The 1 inch height gives the glass a defined base profile, which helps visually finish the bottom of a sliding glass installation.
This EPCO shoe molding 743-ORB uses a press fit approach for both the glass and the rollers, so installation steps center on seating components into the top and bottom of the shoe. The 1/4 inch glass press fits into the top using 2021 glazing vinyl, giving installers a defined channel sized to hold that glass thickness without extra shimming. Because the 12 FT long piece runs across most openings in one length, installers can align the shoe once to the track or sill and then set the glass and rollers along that established line. The 0.438 inch width keeps the footprint narrow, simplifying layout where floor finishes or guides limit available space. With a height of 1 inch, the shoe sets a consistent vertical reference that helps keep multiple sliding panels in the same plane across the entire span.
This shoe molding -1/4INGLAS,12FT L,1INH,ORB from EPCO is designed for builders hardware and sliding door hardware applications where 1/4 inch glass needs a continuous bottom support. The 1/4 inch glass press fit into the top of the shoe using 2021 glazing vinyl gives the glass a defined seating point, so panels rest along a stable base in sliding door assemblies. Because rollers press fit into the bottom of the shoe, the same extrusion serves both as the lower glass holder and as the interface to the sliding system, which is useful in compact assemblies. The 12 FT Long length works well for wide openings or multi-panel runs in residential or commercial sliding door hardware layouts using 1/4 inch glass. With a 0.438 inch width, the shoe fits into narrow sill or track environments, which supports use in constrained thresholds. The 1 inch height establishes a visible base line under the glass, helping the door bottom read as a finished component within the larger opening.
The combination of 0.438 inch width and 1 inch height gives this EPCO shoe molding 743-ORB a compact yet defined profile, so installers have a predictable piece when aligning multiple doors or panels in a straight line. The 1/4 inch glass press fit top channel using 2021 glazing vinyl standardizes how the glass edge is held, which supports repeatable panel spacing when several sliding leaves share the same head and sill geometry. Rollers that press fit into the bottom of the shoe create a single structural path between glass and sliding hardware, reducing variation between panels in the same opening. The 12 FT Long bar length allows installers to run the shoe continuously under the full span of a sliding opening, which helps maintain level support and uniform reveal from end to end. The oil rubbed bronze finish coordinates with other oil rubbed bronze sliding door hardware, so the shoe visually ties into tracks, pulls, and related builders hardware elements in the assembly.
The EPCO 743-ORB shoe molding holds 1/4 inch glass in the top of the shoe using 2021 glazing vinyl, which sets a consistent channel size for that glass thickness in sliding door assemblies.
The shoe molding is 12 FT Long, so it can span wide openings or multi-panel runs, helping maintain a continuous base under the glass in sliding door hardware layouts.
The EPCO 743-ORB shoe molding has a 0.438 inch width and a 1 inch height, creating a compact yet defined profile that fits narrow sills while still providing a visible glass base.
Rollers press fit into the bottom of the shoe, so the molding serves both as the lower glass holder and as the rolling interface within the sliding door hardware system.
The 2021 glazing vinyl in the top of the shoe creates a press fit for 1/4 inch glass, giving the glass edge cushioning and friction that stabilizes panels in the shoe channel.
The oil rubbed bronze finish aligns the shoe molding with other oil rubbed bronze sliding door hardware, helping the base profile visually match existing builders hardware in the opening.
This EPCO shoe molding 743-ORB from Wurth Baer Supply combines a 1/4 inch glass press fit top channel, roller-ready bottom, and 12 FT Long reach to support continuous sliding door bases. The 0.438 inch width and 1 inch height profile provide a compact, consistent reference when laying out sills or tracks. With an oil rubbed bronze finish matching many sliding door hardware components, this shoe moulding integrates into builders hardware projects needing 1/4 inch glass support along the bottom edge. Choose this profile when a single continuous piece, press-fit interfaces, and coordinated finish help streamline a sliding door installation.
Sold In: 1 Each