Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
3/4 inch lower sliding door track from EPCO is a dedicated bottom guide for 3/4 inch by-passing doors, so the doors stay aligned on their path instead of wandering or binding along the opening. The track is designed as sliding door hardware for by-passing doors, which keeps two doors running on parallel lines where space in front of the unit is limited and overlapping movement is needed. Extruded aluminum construction creates a consistent profile along the full length, which supports smooth door travel because the running surface remains uniform from end to end. The track is specified as lower sliding door hardware, so it forms the bottom guide path while the upper component carries the hanging or guiding function in the overall system.
The lower track is identified for use with 3/4 inch by-passing doors, so door sizing and bottom edge preparation can be coordinated to this specific channel geometry during layout. The 1.188 inch width defines the track footprint at the bottom of the opening, which lets the installer plan recesses or surface-mount positions so the doors run directly above the center of the guide. Extruded aluminum construction keeps the profile straight over 12 feet, which matters when aligning the lower track with an upper guide so the doors glide in parallel without tight spots. The clear anodized finish on the aluminum gives the visible portions of the bottom track a uniform appearance, which is useful where the guide is exposed along the face of cabinetry or millwork.
This EPCO lower sliding door track is specified for 3/4 inch by-passing doors, so it serves door sets where one leaf passes in front of another along a shared opening. The profile width of 1.188 inches defines the channel footprint at the sill, which lets it sit in a routed groove or on a flat substrate under cabinet, closet, or similar openings sized for this dimension. As part of sliding door hardware, the track works with upper guiding components so the doors follow a defined path instead of swinging, which is suited to installations where front clearance is limited and overlapping travel is preferred. The track length of 12 feet supports wider spans in a single piece, which reduces transitions along the bottom guide that could interrupt door movement across the opening.
The extruded aluminum lower track is designed with black fiber inserts, which create the interface between the door bottoms and the guide so the doors glide along a softer contact surface than bare metal. This track is identified for use with Fibre Glide number 1801, which means the fiber-based sliding element works in this channel so motion is supported along a matching profile. The track is also specified for use with the Aluminum Upper Guide number 48A34-AP, so the lower and upper components form a coordinated path where the top guide stabilizes the door while the bottom track keeps the leaf centered. Together, the matching lower track, fiber inserts, and compatible upper guide support consistent sliding door alignment from top to bottom, which helps the doors stay on line through repeated cycles of opening and closing along the run.
The track is for 3/4 inch by-passing doors, so it guides two overlapping doors of that thickness along the same opening where each leaf passes in front of the other.
The track is 12 feet long and 1.188 inches wide, so it spans wide openings in one piece while defining the bottom footprint needed in the sill or cabinet floor.
The track is extruded aluminum with a clear anodized finish, so the profile remains straight while presenting a uniform, finished appearance on exposed edges.
The black fiber inserts provide the running surface for the door bottoms, so sliding happens along a fiber contact that supports smoother, quieter guiding in the channel.
This lower track is specified for use with Aluminum Upper Guide number 48A34-AP, so the top and bottom components share a matched path for door alignment.
The track is for use with Fibre Glide number 1801, so that glide component runs in the channel and works with the black fiber inserts to support door travel.
This 3/4 inch lower sliding door track from EPCO ties directly to 3/4 inch by-passing doors, so door thickness and overlap are matched to a known channel profile. The 12 foot extruded aluminum length and 1.188 inch width define a continuous, straight bottom guide, which simplifies planning for longer openings where a single uninterrupted track supports smoother sliding along the span.
Sold In: 1 Each