Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Epco 843-PC deep channel flange anchors oval closet tubing with a 32mm center-to-center layout, so the rod sits in a defined channel for stable support along the closet run. The flange is designed for oval tubing 32mm c/c, which sets a repeatable spacing between mounting points when you are laying out runs across multiple closet sections. A deep channel shape guides the oval tube into position, helping the rod seat consistently along its length. Bright chrome finish gives the flange a polished look that visually matches typical bright chrome closet rods in many installs. Zinc construction provides a solid metal body for the flange, giving the support point substance where the rod bears its load. The EPCO manufacturer part number 843-PC identifies this specific bright chrome, deep channel version when matching to plans or reordering for future projects.
This deep channel flange is produced for oval tubing 32mm c/c, so the tubing drops into a defined path that aligns with that spacing in a closet system. The flange uses 5mm mounting pins, and those pins register the flange to pre-drilled 5mm holes, helping the hardware sit in a repeatable position along cabinet or panel sides. Because the pins locate the flange, the rod height tracks consistently across multiple sections built to the same 32mm system layout. The deep channel then holds the oval tube against the mounting surface, which supports the tube as garments load the rod over time. Bright chrome finish on the visible surface keeps the mounting point visually coordinated wherever the flange edge is exposed inside the closet.
This Epco 843-PC deep channel flange fits into closet, shelf, and garage organization systems where oval tubing 32mm c/c is specified for the hanging rod. Because it is part of the Closet Tubing & Flanges product class, it suits projects that standardize on matching tubing and supports rather than mixed hardware. In Closet Rods & Flanges applications, the deep channel profile positions the oval rod against the installation surface, which is important when the rod must stay on line through multiple cabinet bays. The flange serves as a fixed bearing point for oval tubing 32mm c/c, so both ends of the rod share the same geometry, helping the installed tube present a straight, level appearance. Bright chrome finish ties in with bright chrome tubing, supporting a uniform look in open closets or built-ins where hardware remains visible.
The design for oval tubing 32mm c/c connects directly to common 32mm cabinet system layouts, so this flange aligns with shelf pin and hardware hole rows used in many closet carcasses. That 32mm center-to-center spacing defines how the rod sits between side panels, allowing installers to repeat the same hole pattern for multiple compartments. The (2) 5mm mounting pins are sized for typical 5mm system holes, and those pins act as locating points that hold the flange in place while the remainder of the closet structure is assembled or adjusted. Using 5mm mounting pins also means the flange position tracks precisely with other 5mm-based components in the same panel, keeping the closet rod elevation and setback consistent bay to bay. Zinc construction provides a solid metal structure around the pin locations, supporting the interface between the oval tubing and the side panels under daily hanging loads.
The Epco 843-PC deep channel flange is for oval tubing 32mm c/c, so it aligns with closet rods designed on a 32mm center-to-center layout.
The deep channel flange uses (2) 5mm mounting pins, which locate the flange into matching 5mm holes so rod height and setback stay consistent across panels.
The flange is zinc with a bright chrome finish, giving a solid metal base with a polished surface that visually matches bright chrome closet rods.
The EPCO deep channel flange is used in Closet Rods & Flanges applications, supporting oval closet tubing in shelf, closet, and garage organization layouts.
The 32mm c/c design matches 32mm system hole spacing, which lets the flange and oval tubing align with standard cabinet panel drilling patterns.
The 843-PC manufacturer part number identifies this EPCO deep channel flange version with zinc construction, bright chrome finish, and 32mm c/c oval tubing design.
The Epco 843-PC deep channel flange brings together oval tubing 32mm c/c design, zinc construction, and bright chrome finish for closet rod support within 32mm-based layouts. When planning closet, shelf, or garage organization projects around oval tubing on a 32mm center-to-center grid, this flange ties the rod to the system using (2) 5mm mounting pins and a deep channel seat. Add this EPCO closet rod flange to your layout to align oval tubing 32mm c/c with established drilling patterns while keeping the visible hardware in bright chrome.
Sold In: 1 Each