
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
EPCO coat and hat hook is a compact decorative hook that provides a 2 inch projection for hanging garments where space is tight, which helps keep coats and hats off the floor in small cabinet or wall areas. The hook length of 2 inches, noted as 51 mm, gives a short reach that works well inside shallow closets or on the ends of panels where deeper hooks interfere with doors or adjacent fixtures. A base length of 1-7/8 inch spreads the load along the mounting surface, which helps the hook sit solidly on wood substrates for consistent support. The 3/4 inch base width keeps the footprint narrow, which lets you line up multiple hooks along rails without crowding. The antique brass finish provides a traditional look, which suits classic cabinet and furniture projects that use warm-toned hardware. The EPCO CH101-ZAB-2 designation ties this hook to a specific part number, which simplifies matching existing hooks on repeat jobs.
The 1-7/8 inch base length on this EPCO CH101-ZAB-2 coat and hat hook defines how much linear space you need on a stile, rail, or wall, which helps you plan clearances between adjacent hooks or trim. A 3/4 inch base width limits the side-to-side footprint, which is useful when mounting on narrow face frames or vertical strips where wider bases would overhang edges. The 2 inch projection sets how far the hook extends into the room or cabinet interior, which lets you coordinate with door swing and shelf depth so the hook stays functional without interference. These fixed dimensions make it straightforward to repeat the same layout across multiple doors or panels for a uniform installation.
The EPCO coat and hat hook with 2 inch projection is suited to areas where you need garment storage without a deep hook, such as the inside of cabinet panels or shallow entry walls, because the short reach keeps the hook within tight profiles. Its 1-7/8 inch by 3/4 inch base fits well on cabinet stiles, end panels, or narrow wood rails, so you can add hanging points to furniture pieces or built-ins without redesigning face frames. The antique brass finish aligns with traditional or vintage-inspired interiors, which makes this hook a good match for projects that already use antique brass knobs and pulls. The decorative hook classification places it within trim and finishing work, which ties it naturally into woodworking jobs handled through Wurth Baer Supply.
The defined 2 inch projection on the CH101-ZAB-2 hook lets installers standardize spacing from edges or adjacent hardware, which reduces layout time when running multiple hooks along a board or cabinet interior. Knowing the base length is 1-7/8 inch allows you to mark consistent centerlines and end clearances, which helps every hook land in the same visual relationship to door rails or wall trim. The 3/4 inch base width gives you a clear boundary to keep the hook fully on solid material, which supports firm mounting when working near face-frame edges. Using an EPCO part number tied to these exact measurements supports reorders for matching hooks on future phases, which keeps long-term projects visually consistent.
The EPCO CH101-ZAB-2 hook has a base length of 1-7/8 inch, a base width of 3/4 inch, and a 2 inch projection, which defines the mounting footprint and reach for layout.
The 2 inch projection holds garments slightly off the mounting surface, which helps coats and hats hang without bunching tightly against doors or panels.
The CH101-ZAB-2 hook uses zamack br material, which provides a cast metal body for a consistent decorative shape across multiple installed hooks.
The antique brass finish gives the hook a warm traditional appearance, which aligns with cabinets and furniture that already use antique brass decorative hardware.
The 1-7/8 inch base length helps installers size rails and select mounting spots so each hook sits fully on solid wood with consistent visual spacing.
This small antique brass coat and hat hook is suited to cabinet interiors, narrow entry walls, and furniture sides where a compact decorative hanging point is needed.
The EPCO CH101-ZAB-2 coat and hat hook combines a 2 inch projection with a 1-7/8 inch by 3/4 inch base, which gives you clear dimensions for planning layouts on cabinets and walls. Its antique brass finish coordinates with traditional decorative hardware, which helps maintain a consistent look across doors, panels, and built-ins. The zamack br construction delivers a cast decorative profile that repeats cleanly from hook to hook on multi-unit projects. For woodworking or cabinet jobs needing a compact, defined-footprint hanging point, this decorative hook offers known measurements tied to a specific EPCO part number.
Sold In: 1 Each