Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This EPCO CH106-SS is a staggered two-prong coat and hat hook in Brushed Stainless Steel, sized at 2-1/2 inches in length with a 2-1/8 inch projection from the wall.
A coat and hat hook works on the vertical separation between its two prongs: the upper prong catches a brim or a cap, and the lower one receives the weight of a jacket or bag strap. On shorter hooks in this family the two arms sit close together, which suits lighter, flatter items. At 2-1/2 inches, the CH106-SS spreads those prongs further apart, giving a full winter coat real clearance below while the hat stays put above without the brim pressing against the coat. That separation matters most at a main entry, a ski room, or a mudroom door where bulky outerwear is the daily traffic, rather than a closet or bathroom where a robe and a towel clear each other easily at any length.
The hook is stainless steel, finished in Brushed Stainless Steel. The brushed surface runs in a fine linear grain that diffuses light rather than reflecting it sharply, which keeps the finish looking clean longer between wipes and reads as quieter than a polished surface in most lighting. Brushed Stainless Steel is a neutral, Silver Tone finish that coordinates with contemporary and transitional hardware programs without committing strongly to either warm or cool metal palettes.
This hook suits any interior wall location where a heavier coat-and-hat combination needs a dedicated landing spot: a main entry, a back-door drop zone, a mudroom bench wall, or a garage passage door. The stainless steel construction and brushed finish hold up in high-contact, high-humidity interior spaces such as laundry rooms and covered entryways. The 7/8 inch width means a row of these hooks can be spaced tightly on a short wall without crowding. For designers or cabinet shops specifying a suite of hooks through an entry or along a hallway, the CH106 runs across the full family from compact lengths up to this 2-1/2 inch size, so the same finish and profile can be matched to different prong-separation needs at different locations.
The projection is 2-1/8 inches (54 mm), measured from the mounting surface to the tip of the prong.
A coat and hat hook has two prongs at different heights, with the upper arm positioned for a hat and the lower arm for a coat. A double hook carries two prongs at the same level. This is the staggered arrangement.
Yes, the product ships with screws.
This specific SKU is Brushed Stainless Steel. Other finishes in the CH106 family may be available at different lengths.
When the goal is a dedicated spot for a full coat and a hat together, the 2-1/2 inch length gives the prong separation to keep them from competing for the same space.
Sold In: 1 Each