Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
EPCO coat and hat hook in the CH204-ORB model provides a compact hanging point using a 2-3/8 inch base length, so it fits well on narrow stiles or tight wall spots where space is limited but storage is still needed. The 1-3/8 inch base width creates a stable mounting footprint, helping the hook sit solidly on the surface for everyday use in residential or light commercial spaces. A 1-13/16 inch projection sets the hanging point out from the mounting surface, giving clearance for coats, hats, or bags while keeping the hook profile relatively low to reduce snagging in tight walkways. The oil rubbed bronze finish defines the look of this decorative hook, aligning with darker hardware schemes and trim where a warmer tone is preferred. Zamack material construction provides a cast metal body that supports typical coat and hat loads in entry, mudroom, or cabinet applications.
The EPCO CH204-ORB coat and hat hook uses a base sized at 2-3/8 inches by 1-3/8 inches, giving installers clear mounting geometry when laying out multiple hooks on a rail or wall. The compact footprint allows closer hook spacing along a board or cabinet edge without overlapping bases, which simplifies consistent layout lines and center-to-center measurements. A 1-13/16 inch projection defines how far garments stand off the surface, helping installers plan clearance relative to doors, adjacent hooks, or nearby trim. The zamack construction delivers a sturdy mounting platform for the two mounting screws, which helps the hook stay aligned under load when fastened correctly to the substrate. With its defined length, width, and projection, this decorative hook integrates cleanly into coat racks, cabinet interiors, or wall-mounted rails.
The EPCO CH204-ORB coat and hat hook, classified under decorative hooks, is suited to projects that need both function and a finished appearance. Its 2-3/8 inch base length works well along hallway boards, behind doors, or inside closets where vertical or horizontal rails are used for garment storage. The 1-3/8 inch base width lets the hook sit comfortably on standard face frame rails or narrow solid-wood slats, allowing installers to build compact yet useful hanging stations. Oil rubbed bronze finish positions this hook naturally in designs using darker knobs, pulls, or hinges, helping maintain a unified look in entryways, mudrooms, or cabinet interiors. Because the projection is 1-13/16 inches, this hook supports hanging coats, hats, or bags without pushing them excessively into the room, which is helpful in tighter corridors or small mudrooms where clearance is limited.
The defined 2-3/8 inch by 1-3/8 inch base dimensions give repeatable reference points for layout, allowing installers to mark consistent centerlines and edge distances across multiple hooks on a board or panel. The 1-13/16 inch projection is a fixed value, so spacing between rows or relative to nearby doors can be planned with confidence, reducing later adjustments. The zamack material construction offers a rigid casting, which helps the hook maintain its angle under normal hanging loads, so lines of hooks stay visually consistent over time. Being an EPCO decorative hook with the CH204-ORB manufacturer part number allows clear identification in drawings, cut lists, or reorders, helping shops match exact finish and geometry across multiple areas of a project. The oil rubbed bronze finish also helps installers align this hook with other specified EPCO decorative hardware and moldings in the same project scope.
The EPCO CH204-ORB hook uses a 2-3/8 inch base length and 1-3/8 inch base width, giving a compact footprint that works well on narrow rails, cabinet sides, or wall boards.
The EPCO CH204-ORB coat and hat hook has a 1-13/16 inch projection, which sets coats and hats away from the mounting surface while keeping the profile tight for smaller spaces.
The EPCO CH204-ORB hook is made from zamack, giving it a solid cast metal body suitable for everyday coat and hat hanging applications.
The CH204-ORB decorative hook has an oil rubbed bronze finish, allowing it to coordinate with darker decorative hardware in entryways, closets, or cabinetry.
The EPCO CH204-ORB hook uses its 2-3/8 inch by 1-3/8 inch base as the mounting surface, giving installers a defined area to fasten the hook securely to wood or similar substrates.
The EPCO decorative coat and hat hook fits projects needing compact hanging points, such as coat rails, mudroom boards, cabinet interiors, and closet walls using an oil rubbed bronze hardware theme.
The EPCO coat and hat hook CH204-ORB offers clearly stated dimensions, a zamack cast metal body, and an oil rubbed bronze finish, which together support precise layout and finish coordination on your project. The 2-3/8 inch by 1-3/8 inch base and 1-13/16 inch projection give predictable geometry when planning rail spacing, door clearance, or cabinet placement. For work that calls for decorative hooks within the same finish family, this EPCO model gives you an identified manufacturer part number and consistent appearance, ready to integrate into entryways, closets, or cabinet runs where organized hanging is required.
Sold In: 1 Each