Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Coat and hat hook from EPCO gives a compact hanging point where a small decorative hook is needed, so it supports light garment storage in tight or visible areas. The base length of 1-3/8 in (35 mm) defines the footprint at the mounting surface, which helps when laying out multiple hooks on a narrow board or trim piece. A base width of 3/4 in sets the side-to-side coverage, so installers can plan for adequate backing behind thin material. The 2-3/16 in projection sets how far the hook stands off the surface, which helps prevent garments from rubbing the wall or cabinet face during everyday use. The antique brass finish establishes a classic look, so it can align with traditional decorative hardware on nearby doors or cabinets. The hook is identified by EPCO manufacturer part CH301-ZAB-2, which ties directly to this specific size and finish.
The base length of 1-3/8 in focuses the mounting footprint into a short rectangle, which is useful when placing hooks on face frames or narrow wall cleats. The 3/4 in base width supports side-to-side stability while still fitting on slim trim pieces, so installers can add storage points without widening the substrate. With a 2-3/16 in projection, the hook extends far enough to clear light coats or hats from the mounting surface, reducing contact marks during regular use. The zamack br material gives the decorative hook a cast metal form, which aids in achieving clean contact between the back of the base and the mounting surface for repeatable placement.
The coat and hat hook design suits decorative hardware and moldings applications, so it aligns well with woodworking projects that call for visible hanging points. The 1-3/8 in base length lets the hook sit neatly on narrow wood rails, such as small hall racks, closet boards, or cabinet ends, while still giving enough contact area for fastening. A base width of 3/4 in allows installers to position the hook on slim stiles or pilasters without the base overhanging the edges, which keeps layouts clean along a row of hooks. The 2-3/16 in projection supports hanging light coats, hats, or similar items in residential or light-use spaces, because there is enough stand-off to keep fabric away from finished surfaces. The antique brass finish ties this hook to traditional decorative schemes, making it suitable for projects that use warm-toned knobs, pulls, or other antique brass hardware.
The rectangular base defined by the 1-3/8 in length and 3/4 in width makes layout straightforward, because installers can reference simple measurements when positioning multiple hooks along a rail. With a known 2-3/16 in projection, planners can set vertical clearances so hung items do not conflict with shelves, cabinet doors, or adjacent hooks in the same run. The zamack br construction gives the hook a stable, molded body, which supports consistent seating of the base against flat wood or panel surfaces for uniform appearance from hook to hook. Being polybagged with screws aligns the fasteners to the hook design, which supports predictable drive depth and bite into typical woodworking substrates. The EPCO CH301-ZAB-2 designation clearly identifies this exact antique brass version, helping shops keep replacement or add-on hooks matched to existing installations.
The EPCO coat and hat hook has a base length of 1-3/8 in and a base width of 3/4 in, which defines the mounting footprint for laying out hooks on rails or panels.
The CH301-ZAB-2 hook projects 2-3/16 in from the mounting surface, providing stand-off so coats or hats hang away from walls or cabinet faces.
The decorative hook is made from zamack br, giving it a cast metal body that supports a defined shape and solid feel for decorative hardware applications.
The EPCO CH301-ZAB-2 hook has an antique brass finish, which supports a classic look that coordinates with other antique brass decorative hardware.
This zamack decorative hook is polybagged with screws, which connects the hook directly to a matched fastening method for typical woodworking substrates.
The CH301-ZAB-2 part number identifies the specific EPCO coat and hat hook with antique brass finish and defined dimensions, supporting consistent reordering and matching.
The EPCO coat and hat hook CH301-ZAB-2 combines a 1-3/8 in by 3/4 in base with a 2-3/16 in projection, giving a compact yet functional hanging point for woodworking projects. The antique brass finish and zamack br construction align with decorative hardware and moldings work, so shops can match this hook to existing trim and fittings. For projects needing a defined footprint and controlled stand-off, this hook offers known dimensions that directly support layout planning and repeatable results.
Sold In: 1 Each