EPCO 72 inch aluminum tab pull gives a continuous 6 foot gripping edge along cabinetry or panels, so one pull runs the full span instead of breaking it up with multiple shorter pulls. The anodized satin clear aluminum finish forms a hard surface on the metal, which supports consistent appearance along the full 72 inch (1829 mm) length in typical indoor environments. Flush mortise mounting seats the tab pull into the edge of the 3/4 inch material thickness, so the pull sits low-profile while still providing a defined finger grip. This 6 foot length helps align doors or drawers visually when several openings share one continuous pull. The indoor rating ties this DP412-L-A pull to interior millwork, where the material and finish are selected for typical room conditions. As a decorative handle in the Handles and Pulls class, it also reads as a clean linear detail in modern casework.
The flush mortise mounting on this EPCO 72 inch aluminum tab pull means the pull is set into a machined recess, so the pull edge aligns closely with the cabinet or panel surface. This approach supports straight sightlines across the front of doors or drawers by limiting how far the pull projects beyond the edge. Design for 3/4 inch material thickness ties the mortise depth and tab geometry to a widely used cabinet stock dimension, reducing guesswork when selecting sheet goods. Over a full 6 foot length, that consistent fit along 3/4 inch material helps keep the grip line even from end to end. Because the pull is intended for indoor use, the combination of material thickness match, flush installation, and interior environment keeps the design focused on finished millwork projects.
This EPCO 72 inch aluminum tab pull, in the Handles and Pulls decorative hardware class, suits interior work where a long continuous grip is needed along 3/4 inch stock. The 6 foot length allows one pull to serve multiple doors or wide drawer fronts in a single run, reducing interruptions in the hardware line. Its anodized satin clear aluminum finish pairs naturally with other aluminum details, so the pull can run the full width on upper or lower cabinets while visually tying into matching components. Because it is intended for indoor use, the DP412-L-A part slots into built-ins, casework, and similar interior assemblies where material thickness and finish are controlled from the design stage.
The flush mortise mounting on the EPCO DP412-L-A tab pull embeds the pull within the edge of the 3/4 inch material thickness, so the hardware reads as part of the panel rather than an add-on. Over the full 72 inch (1829 mm) length, that flush fit helps hold a straight, consistent reveal that aligns with neighboring doors or drawer fronts. Because the pull is designed as a no-holes, no-screws solution in the SAP description, the installation concept removes visible fastener heads from the face, so the only visible element is the anodized satin clear aluminum gripping edge. This approach is practical on long cabinet runs where a clean, uninterrupted line of decorative hardware is part of the design intent, and where the single 6 foot indoor aluminum pull ties multiple openings together visually.
The EPCO DP412-L-A tab pull has a 72 inch (1829 mm) length, so it covers a full 6 foot run and can span wider cabinet or panel sections with a single continuous grip.
The flush mortise mounting seats the pull into the panel edge, so the grip aligns closely with the surface and creates a low-profile, streamlined appearance along cabinet fronts.
The tab pull is made from aluminum with an anodized satin clear finish, giving a consistent metallic look that coordinates with other satin aluminum decorative hardware.
The DP412-L-A tab pull is designed for 3/4 inch material thickness, aligning directly with standard cabinet and casework stock dimensions used in many indoor projects.
The SAP description specifies indoor use, so this anodized aluminum pull is aligned with typical interior millwork and cabinet environments.
The no-holes, no-screws description indicates a concept without visible fastener heads on the face, leaving the long aluminum grip as the primary visible detail.
The EPCO 72 inch aluminum tab pull DP412-L-A pairs a full 6 foot length with flush mortise mounting and a 3/4 inch material thickness focus, so it suits long, clean cabinet runs. The anodized satin clear aluminum indoor finish aligns with interior millwork and other satin aluminum hardware in the same space. When a single continuous decorative pull is needed across multiple openings or wider panels, this Handles and Pulls class product offers a defined, linear grip that runs the entire span.
Sold In: 1 Each