Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
EPCO Edge Series 72 inch tab pull defines this handle as a continuous edge pull designed to run a full 6 foot length along doors or drawer fronts, which helps create long, uninterrupted handle lines on cabinetry runs. The anodized polished aluminum material provides a bright metallic finish while maintaining a stable surface, which supports a consistent appearance along the entire 72 inch (1829 mm) length. The 6 foot overall length gives fabricators enough material to span wide panels or cut multiple shorter pulls from one piece, which can streamline layout and cutting on shop projects. The DP41-L-PA identification ties this pull to EPCO Edge Series tab pulls, which helps align it with existing shop standards when matching prior work. The PULL NO HOLES/SCREWS detail means the pull arrives without pre-drilled mounting holes, which leaves drilling patterns fully under the fabricator's control during installation.
The web description states that this EPCO tab pull is back mounted, which means fasteners are driven from the rear of the door or drawer front through to the pull, keeping the front edge visually clean. The stated suitability for material thickness 1/2 inch to 7/8 inch defines the working range for the door or drawer substrate, which helps installers select this pull for fronts that fall within that thickness band. That 1/2 inch to 7/8 inch range also guides screw length selection and drilling depth, because the grip of the back mounted pull depends on engaging both the pull body and the panel within that thickness. The 6 foot length can be cut to suit individual fronts inside this thickness range, which allows one length to service multiple cabinets on the same project.
The SAP description specifies PULL NO HOLES/SCREWS, 6FT L, POLISHED ALUM, which positions this product for applications where a continuous 6 foot polished aluminum edge is part of the cabinet design. The Edge Series and tab pull wording define a pull that grips from the edge of a panel rather than from the face, which suits doors and drawer fronts where a minimalist handle line is preferred. The specified material thickness range of 1/2 inch to 7/8 inch indicates that this pull is intended for common cabinet and furniture panel constructions within that span, which covers many plywood, MDF, and panel builds used in woodworking shops. Being 72 inches (1829 mm) long allows the pull to run across wide pantry doors or banked drawer fronts, or be cut into segments matching each front while keeping the same anodized polished aluminum finish across the installation.
The back mounted description means this tab pull works on panels where access to the rear face is available during assembly, which aligns with typical cabinet door and drawer construction workflows. The polished aluminum surface paired with Edge Series styling lets designers create a consistent horizontal or vertical line across multiple units, which is often a requirement in contemporary cabinet layouts. Because the face is free of pre-drilled holes, the pull adapts to varying handle spacing or cut lengths on different pieces, which supports both one-off custom jobs and repeat shop patterns.
The no holes/no screws statement in the web description means the pull arrives as a solid length without factory hole locations, which gives fabricators freedom to drill through the back and into the pull exactly where their layout demands. That flexibility matters when panel sizes change from job to job, because installers can center or offset the pull along the 6 foot length without being constrained by preset hole spacing. The back mounted design keeps all fastener entry on the rear of the front, which preserves the clean anodized polished aluminum view on the working edge, supporting projects that specify uninterrupted metal lines.
The defined material thickness range of 1/2 inch to 7/8 inch directly affects how the back mounted fasteners engage the pull body, which helps maintain a solid connection when correctly matched to those panel thicknesses. The 72 inch (1829 mm) length provides ample stock for trial cuts and final pieces, which lets shops test fit a short section before committing to full-length installation. The EPCO DP41-L-PA part number connects this profile to the broader EPCO handles and pulls class, which can simplify job documentation and future service work by tying drawings and orders to a consistent reference.
The EPCO DP41-L-PA tab pull has a 6 foot overall length, also listed as 72 inches or 1829 mm, which lets installers span wide doors or cut multiple shorter pulls from one piece.
The EPCO Edge Series tab pull is back mounted, so fasteners pass from the rear of the door or drawer front into the pull, keeping the visible edge free of fastener heads.
The 72 inch tab pull is specified for material thickness from 1/2 inch to 7/8 inch, which aligns with many standard door and drawer front constructions in cabinet shops.
The EPCO tab pull is made from anodized polished aluminum, providing a bright metallic look with a treated surface that supports a consistent finish along its full length.
No holes/no screws indicates the pull has no pre-drilled mounting holes, allowing fabricators to place their own back mounting holes to match specific layouts and drilling setups.
The DP41-L-PA part number uniquely identifies this EPCO Edge Series polished aluminum tab pull, helping shops match drawings, orders, and reorders to the same profile.
The anodized polished aluminum construction, Edge Series tab profile, and 6 foot length position this EPCO pull for runs where a continuous metal edge is part of the design. The stated 1/2 inch to 7/8 inch material range and back mounted format define where it fits within common cabinet door and drawer builds. The PULL NO HOLES/SCREWS detail and DP41-L-PA reference give fabricators drilling flexibility while tying the handle to a specific EPCO profile. For projects needing a 72 inch (1829 mm) anodized polished aluminum tab pull that matches these parameters, this part offers a defined option to integrate into shop layouts and cut lists.
Sold In: 1 Each