Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
EPCO Edge Series tab pull gives a low-profile grip that mounts at the cabinet edge, so fronts stay visually clean while doors and drawers still open with a solid handhold. The 4 inch center to center dimension aligns with standard drilling layouts, which streamlines boring and speeds up repeat installs across a run of cabinets. A 6 inch overall length spreads the load over a wider section of the door or drawer edge, which helps the pull feel stable when operated from different hand positions. The 1-9/16 inch projection provides finger clearance off the face, so users can grab the pull without contacting the surface as often. Back mounted installation keeps fasteners hidden from the front, which supports a modern appearance on face surfaces. The anodized oil rubbed bronze finish establishes a consistent dark tone along the edge, which helps the pull visually coordinate with similar bronze hardware through a project.
The pull is designed for material thickness of 1/2 to 7/8 inch, which defines the range of doors and drawer fronts where the profile will seat correctly on the edge. Within that range, the back mounted layout places the grip where the hand naturally reaches while the fasteners engage from the interior side, which supports a smooth front face on both face-frame and frameless cabinets using eligible thicknesses. The 4 inch center to center drilling distance lets installers adapt existing jigs used for standard bar pulls, which can cut layout time when swapping to this edge-style pull on a project. With 1-9/16 inch projection, the installed pull stands off enough that hands clear the cabinet surface as they pull, which can help preserve finish appearance under frequent use.
The EPCO Edge Series tab pull works on cabinet doors and drawer fronts within the 1/2 to 7/8 inch material thickness range, which covers many common residential and light commercial cabinet constructions. Because it is back mounted, the pull suits installations where the interior face is accessible for drilling and fastening, such as new cabinet builds or full door and drawer replacements. The 4 inch center to center spacing aligns with typical cabinet hardware patterns, which supports use in layouts where other 4 inch pulls are already specified. Its 6 inch overall length positions the grip along more of the edge, which can be useful on wider drawer fronts where a small pull might feel undersized. The anodized oil rubbed bronze finish ties into projects that specify a dark bronze tone, which allows this pull to visually match other oil rubbed bronze handles and hinges already planned for the job.
The fixed 4 inch center to center dimension helps keep drilling templates simple, which reduces the chance of misaligned holes when repeating the pattern across multiple cabinets in a kitchen or bank of casework. The 1-9/16 inch projection sets a predictable standoff from the face, which means users get similar hand clearance whether the pull is installed on doors or drawers in the same run. A 6 inch overall length gives a longer grip span, which allows installers to position the pull consistently while still giving homeowners flexibility on where they place their hand. The back mounted configuration hides the fasteners behind the workpiece, which leaves only the anodized oil rubbed bronze surface visible at the edge for a uniform appearance. The EPCO DP41-ORB-6 part number clearly identifies this aluminum Edge Series model, which helps shops specify and track the same pull across drawings, purchase orders, and future expansions of the project.
The EPCO Edge Series tab pull has a 4 inch center to center dimension, which matches common drilling patterns and helps align with existing cabinet hardware layouts.
The EPCO DP41-ORB-6 edge pull has a 6 inch overall length, which provides a longer gripping area along the cabinet edge for comfortable operation.
The tab pull has a 1-9/16 inch projection, which sets the grip off the cabinet face for finger clearance during everyday opening and closing.
The EPCO Edge Series tab pull is back mounted, so it fastens from the rear side of the door or drawer front and leaves the front face uninterrupted.
The pull is designed for material thickness of 1/2 to 7/8 inch, which defines the door and drawer front range where it will seat correctly on the edge.
The EPCO DP41-ORB-6 pull has an anodized oil rubbed bronze finish, which provides a dark bronze appearance that coordinates with similar hardware finishes.
The EPCO Edge Series tab pull with 4 inch center to center drilling, 6 inch overall length, and 1-9/16 inch projection gives a defined grip point at the cabinet edge while keeping faces clean. Its back mounted design, suitability for 1/2 to 7/8 inch material, and anodized oil rubbed bronze finish align well with cabinet jobs that call for a streamlined, dark-toned edge pull. Selecting this DP41-ORB-6 model keeps specifications consistent wherever the same look and handfeel are needed across a project.
Sold In: 1 Each