Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
EPCO Edge Series tab pull gives a compact pull solution using a 1 inch center to center dimension, so it suits tight drawer or door layouts where small spacing matters. The 1-1/2 inch overall length keeps the pull short at the cabinet edge, which helps on narrow faces or clustered fronts where longer pulls would crowd each other. An anodized stainless steel finish provides a stainless look in an aluminum pull, so it coordinates visually with stainless hardware while using a lightweight profile. Back mounted installation keeps fasteners hidden behind the door or drawer front, which leaves the front surface clear for a minimal appearance. The pull is designed for material thickness of 1/2 inch to 7/8 inch, giving coverage for common cabinet door and drawer front builds so one model can serve across a run. This DP41-SS model sits within EPCO handles and pulls, tying into a consistent decorative hardware line.
The EPCO Edge Series tab pull uses a 1 inch center to center mounting pattern, which sets the drill points for through-bored holes at the cabinet edge. With an overall length of 1-1/2 inch, the pull occupies a short run along the door or drawer edge, so layout at the corner stays tight and predictable. The 1-9/16 inch projection defines the working stand-off from the face, establishing consistent finger clearance along a line of doors. Designed for 1/2 inch to 7/8 inch material thickness, the pull matches common cabinet front builds, so edge grip feels consistent whether mounted on thinner or thicker panels within that range. Back mounting anchors the pull from behind the panel, letting the visible side remain free of exposed fasteners while still holding the pull firmly at the edge.
The EPCO Edge Series tab pull applies as decorative hardware within the handles and pulls category, so it functions as the primary touch point on cabinet doors and drawers. Its 1 inch center to center layout positions the mount close to the edge, which suits applications where the user reaches from the cabinet face side rather than the center of the panel. The anodized stainless steel finish lets the aluminum pull present a stainless appearance, so it coordinates with stainless-faced appliances or hinges in the same visual field. The compact 1-1/2 inch overall length helps on smaller fronts, such as narrow utility doors or short drawers, where oversized handles could dominate the face. On thicker fronts within the 1/2 inch to 7/8 inch range, the same pull continues to sit correctly, so door sizes can change along a run without changing this hardware choice.
The defined 1 inch center to center spacing on the EPCO DP41-SS tab pull supports consistent drilling jigs, so repeated installations follow the same hole layout across many fronts. Because the overall length is 1-1/2 inch, the distance from the mounting points to each edge of the pull stays small, which keeps the grip concentrated where the user expects it when reaching at the corner. The 1-9/16 inch projection remains fixed from front to front, so hand clearance and shadow lines stay uniform on aligned doors and drawers. The specified 1/2 inch to 7/8 inch material thickness range keeps the effective engagement of the back mounted connection within the intended span, which supports a consistent feel when pulling open different cabinet sections. Being part of EPCO handles and pulls, this DP41-SS model can sit with other EPCO decorative hardware pieces while keeping dimensions predictable.
The EPCO Edge Series DP41-SS tab pull has a 1 inch center to center dimension, which sets the spacing for mounting holes and supports tight installations on smaller doors or drawers.
The EPCO DP41-SS tab pull has an overall length of 1-1/2 inch, so it stays compact near the cabinet edge and suits narrow or closely spaced fronts.
The anodized stainless steel DP41-SS tab pull projects 1-9/16 inch from the cabinet surface, providing finger clearance while maintaining a relatively low profile.
The EPCO Edge Series tab pull is back mounted, so it fastens from the rear of the door or drawer front, leaving the visible face free of exposed mounting points.
The DP41-SS is designed for material thickness of 1/2 inch to 7/8 inch, covering typical cabinet doors and drawer fronts within that span.
The tab pull is an aluminum component with an anodized stainless steel finish, giving it a stainless appearance while using an aluminum body.
The EPCO Edge Series tab pull with 1 inch center to center spacing and 1-1/2 inch overall length offers a compact gripping option at the cabinet edge. Its 1-9/16 inch projection and design for 1/2 inch to 7/8 inch material thickness support consistent feel across standard doors and drawers. The anodized stainless steel finish on an aluminum body aligns with stainless visual themes while keeping the hardware light. For projects using EPCO handles and pulls, the DP41-SS part ties directly into that decorative hardware line for coordinated cabinet fronts.
Sold In: 1 Each