Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Large Oval Corner Rod Kit turns a 90 degree closet corner into continuous hanging space by using an oval closet rod that wraps the corner. This gives a clean, uninterrupted run so hangers slide around the corner instead of bunching at the turn. The 90 degree corner oval closet rod layout matches corners that meet at a right angle, which simplifies planning around standard closet framing. The kit uses 15mm wide by 30mm high oval tubing, so the vertical height of the rod supports hanging loads while the narrower width presents a slimmer front profile along the closet opening. Each side of the corner rod is 30 inches long, creating two equal runs that balance the corner and help align with typical reach-in or walk-in closet sections. A polished chrome finish on the oval closet rod presents a bright metallic surface that visually matches other polished chrome closet components.
This large oval corner rod kit uses oval under-shelf flanges that mount beneath a shelf, so the rod sits directly under the shelf structure and follows the 90 degree line of the corner. The oval under-shelf center supports carry the oval profile along each 30 inch section, reinforcing the span between flanges and helping the 15mm by 30mm tube keep its shape under hanging loads. With the oval rod seated in matched oval supports, the 30mm high dimension is held upright along the corner, which maintains the intended strength direction of the 1 mm wall tubing.
In a closet where two walls meet at 90 degrees, the 90 degree corner oval closet rod connects those walls so clothes can hang around the corner instead of on two separate straight rods. Each side of the corner rod being 30 inches long yields two straight sections that project equally from the corner, which helps align the rod runs with common shelf and panel layouts on both walls. The 15mm wide by 30mm high oval shape keeps the larger 30mm dimension vertical, so when hangers pull down on the rod, the load is carried through the deeper axis of the tube. Wall thickness at 1 mm sets the tube gauge for these 30 inch legs, supporting the hanging loads over that fixed length without excess material. The polished chrome finish runs along both 30 inch sides and through the corner bend, presenting a continuous metallic look across the entire corner installation.
The oval under-shelf flanges are shaped for the 15mm by 30mm oval tube, so the rod nests into supports that hold the profile in the correct orientation, keeping the 30mm height aligned for vertical strength. Matching oval under-shelf center supports add bearing points along each 30 inch section, which limits flex in the 1 mm wall tubing when the rod is loaded with hanging garments. Because the rod turns a 90 degree angle, the hanger hook path stays consistent as it travels from one wall to the other, helping garments slide smoothly around the corner instead of catching. The polished chrome surface on the large oval corner rod reflects light along the length, which visually emphasizes a straight, even installation line from flange to center support and around the bend. Epco part number KIT830-90-PC ties these dimensions, supports, and finish into a single identified configuration, which aids in matching rods and supports across multiple closet sections.
The large oval corner rod kit uses tubing that is 15mm wide by 30mm high, with each side of the 90 degree corner rod measuring 30 inches in length.
The 90 degree angle lets the oval closet rod run from one wall around the corner to the next, so hangers travel across the corner in a continuous line.
The kit uses oval under-shelf flanges and oval under-shelf center supports, so the 15mm by 30mm oval rod is held in matching oval seats along its runs.
The 1 mm wall thickness defines the metal gauge of the oval tube, influencing how the 30 inch spans handle the regular hanging loads in a closet.
The Epco KIT830-90-PC corner rod has a polished chrome finish, providing a bright metallic appearance that coordinates with other polished chrome closet components.
This large oval corner rod is held by oval under-shelf flanges and center supports, positioning the 15mm by 30mm oval tube directly beneath the shelf structure.
Choosing this large oval corner rod kit with 15mm by 30mm tubing, 30 inch legs, and a 90 degree angle aligns closet hanging space with a right-angle corner layout. The polished chrome finish and Epco KIT830-90-PC identification support consistent hardware selection when planning multiple closet sections. For projects that call for an oval closet rod running under a shelf through a 90 degree turn, this configured large oval corner rod kit matches that layout.
Sold In: 1 Kit