
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
EPCO black 1-5/16 inch knob provides a compact, round pull point for doors and drawers where a small, consistent grip is needed. The 1-5/16 inch (33 mm) diameter spreads hand contact over a modest area, which helps users get a positive hold without dominating narrow rails or small fronts. The 1 inch projection sets the knob off the surface enough for fingers to wrap comfortably, while keeping the hardware close to the face of the cabinet so it does not snag on passing traffic in tighter workspaces. The plastic construction creates a lightweight pull that suits many laminate or painted surfaces, giving shops an option when matching lighter-door applications. The black finish establishes a neutral, low-reflective look, so installers can repeat the same part across different room palettes while maintaining a single part number on the shelf. The KP401-2-BL designation ties the knob directly to EPCO documentation for repeat ordering.
The stated 1 inch projection defines how far this EPCO black 1-5/16 inch knob stands off the door or drawer face, which directly affects hand clearance and how close the hardware stays to adjacent panels. Because the knob is described with #8 x 1-1/8 inch self tapping screws, the mounting approach is oriented around a screw-driven connection, giving fabricators a clear expectation for the fastener style passing through the front into the knob. The 1-5/16 inch diameter profile also influences drilling and spacing decisions, since installers can allow enough distance between knobs or from edges to avoid overlapping grips on tightly laid-out cabinetry. The plastic construction ties into fit on lighter doors, where a modestly sized, lighter knob is often preferred to maintain balanced operation of hinges and slides.
The EPCO black 1-5/16 inch diameter knob is described within the decorative hardware and moldings knobs category, so it is positioned for use as a pull point on cabinet doors and drawer fronts. The modest 1-5/16 inch (33 mm) diameter keeps the footprint small enough for narrow face frames, small bath cabinets, or utility storage where space between hardware pieces can be tight. With a 1 inch projection, the knob extends far enough from the surface to accommodate fingers without adding much depth into walkways, which is useful on cabinetry along tight corridors or shop fixtures. The plastic construction connects well with painted or laminated casework, giving installers a knob that aligns with lighter or composite substrates often used in residential or light commercial cabinetry. The black coloration supports use in layouts that call for a dark accent against light doors, or a near-monochrome look on darker fronts, while sticking with the same EPCO KP401-2-BL part number across these scenarios.
The 1-5/16 inch diameter gives installers a predictable face size, so they can standardize drilling locations and set consistent offsets from door edges across multiple cabinets, reducing layout variation from piece to piece. The 1 inch projection defines how far the knob protrudes, which helps when aligning hardware depth across different cabinet runs to maintain a uniform look and predictable user grip. Knowing the knob is plastic provides insight into the interaction between the hardware and the substrate, helping shops pair the knob with doors where a lighter pull weight aligns with the door construction and intended use. The reference to #8 x 1-1/8 inch self tapping screws in the description links the knob to a common screw type and length used in cabinet work, allowing tradespeople to coordinate drilling and fastening processes around that dimension. The EPCO KP401-2-BL identifier allows project documents and cut lists to specify this exact knob, so replacement or expansion of a run can match original installations with the same size, color, and material.
The EPCO KP401-2-BL knob has a 1-5/16 inch (33 mm) diameter and a 1 inch projection, giving a compact, consistent grip point suitable for cabinet doors and drawer fronts.
The EPCO black 1-5/16 inch knob is described as plastic, which keeps the pull lightweight and well-suited to many laminated or painted cabinet and drawer applications.
The 1 inch projection sets the knob off the door or drawer far enough for finger clearance while keeping the hardware close to the surface to reduce protrusion into walkways.
The web description notes #8 x 1-1/8 inch self tapping screws, indicating a screw-driven fastening method commonly referenced when planning cabinet knob installation.
This EPCO KP401-2-BL knob is listed in decorative hardware and moldings under knobs, aligning it with typical cabinet and drawer pull applications in woodworking projects.
The EPCO KP401-2-BL part number uniquely identifies this black 1-5/16 inch plastic knob, helping shops match existing jobs or standardize future orders around a single specification.
The EPCO black 1-5/16 inch diameter knob with 1 inch projection gives shops a defined size, color, and material they can repeat across multiple cabinet runs. With its plastic construction, black finish, stated dimensions, and EPCO KP401-2-BL identification, this knob fits straightforward decorative hardware needs on doors and drawers where a compact pull is preferred. For projects calling for a small, round black knob that aligns with standard cabinet practices and a clearly documented part number, this model offers a consistent choice ready to match future reorders and expansions.
Sold In: 1 Each