EPCO WP32 oak pull is a wire series wood handle that provides a centered 3-1/2 inch (89 mm) grip span for typical cabinet door and drawer layouts. That 3-1/2 inch center to center dimension lets installers line up drilling patterns with a common size used across many cabinetry runs, which helps keep rows of fronts visually consistent. The pull has an overall length of 4-1/8 inch, so it extends slightly beyond the mounting centers and gives a defined handhold across the face. Its 1-1/4 inch projection sets the pull out from the surface at a practical distance, giving finger clearance without pushing hardware too far into walkways. A 5/8 inch width across the pull keeps the profile slim while still offering enough bearing surface for a solid grip in daily use.
The 3-1/2 inch center to center layout on the EPCO WP32 oak pull establishes a fixed drilling distance, which supports straight, repeatable hole placement across multiple doors or drawers. With a 4-1/8 inch overall length, the pull provides visual reference at each end beyond the fastener points, which helps align it square to door edges and rail lines. The 1-1/4 inch projection defines how far the handle sits off the surface, guiding planning for clearance near adjacent doors, walls, or appliance panels. At 5/8 inch width, the body of the pull occupies a modest footprint on the face, which is useful when positioning it on narrow stiles or smaller drawer fronts where space is tight.
This EPCO wire series 3-1/2 inch center to center oak pull is suited to cabinet doors and drawers that follow a standard 3-1/2 inch drilling pattern, giving a consistent handle line across a run of units. The 4-1/8 inch overall length works well on medium-width doors and common drawer sizes, so one model can be used repeatedly without changing drilling distances. Because the projection is 1-1/4 inch, the pull stands out from the surface at a distance that fits many kitchen, bath, or shop cabinet depths where finger access is important but space in front of the cabinets is limited. The 5/8 inch width offers a compact footprint, allowing this oak pull to sit comfortably on narrow frames or smaller drawer faces without crowding adjacent hardware locations.
The 3-1/2 inch center to center measurement on the EPCO WP32 oak pull defines a precise hole spacing, which supports the use of drilling templates and reduces layout variation from cabinet to cabinet. Its 4-1/8 inch overall length gives a clear visual bar that can be lined up with rails, stiles, or drawer edges, helping installers orient the pull parallel to design elements for a clean finished line. With a 1-1/4 inch projection, the pull offers enough stand-off for fingers to wrap around the grip, which supports smoother opening and closing without scraping knuckles on the wood front. The 5/8 inch width focuses the contact area so the handle feels secure without overpowering the face of smaller furniture-grade pieces. As an oak component, the pull supports projects where the handle material is expected to match or coordinate with wood doors and drawer fronts, helping create a unified appearance across the installation.
The EPCO WP32 oak pull uses a 3-1/2 inch (89 mm) center to center drilling distance, which supports a standard layout across multiple cabinet doors and drawers.
The EPCO wire series WP32 pull has an overall length of 4-1/8 inch, providing a defined bar that spans past the mounting points for a balanced look on fronts.
The EPCO WP32 oak pull has a 1-1/4 inch projection, placing the gripping area away from the cabinet face for practical finger clearance during use.
The EPCO WP32 wood pull is 5/8 inch wide, giving a slim profile that fits comfortably on narrower stiles and smaller drawer fronts.
The EPCO WP32 pull is described as an oak pull, so it is suited to projects where a wood handle coordinates with wood cabinet fronts.
The EPCO WP32 oak pull is identified by manufacturer part number WP32, which ties directly to this 3-1/2 inch center to center, 4-1/8 inch length model.
The EPCO WP32 oak pull from Wurth Baer Supply combines a 3-1/2 inch center to center drilling pattern with a 4-1/8 inch overall length, a 1-1/4 inch projection, and a 5/8 inch width. Those dimensions support straightforward cabinet layouts where consistent spacing, finger clearance, and a compact footprint are important. For projects calling for an oak handle that follows this specific wire series pattern, this model offers a defined set of measurements that align well with common cabinet and drawer configurations.
Sold In: 1 Each