Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This Karran postform laminate router bit cuts a precise 15-degree bevel at the sink opening, designed for use with high-pressure laminate and solid surface countertops in postform sink installations. The 1/4-inch shank fits a wide range of trim routers and laminate-trim tools used at the countertop stage of a sink install.
A postform laminate sink cutout needs a beveled edge at the opening so the countertop surface meets the sink bowl cleanly without a sharp perpendicular drop. The 15-degree angle on this bit is the profile that matches that transition, letting the laminate or solid surface edge sit flush and finished at the sink perimeter rather than leaving a raw cut. That detail matters both for appearance and for keeping moisture from working into an unfinished edge over time.
The bearing runs against the material to guide the cut, which means the depth and angle stay consistent around the full perimeter of the opening even when routing a curved or irregular sink outline. Because the bearing does the registration work, the bit does not rely on a fence or guide setup, which keeps the process manageable in the field. The 1/4-inch shank is the format most compact trim routers accept, so this bit slots into the tool most installers and fabricators already have on hand for laminate work.
Cabinet installers fitting a postform laminate countertop with an undermount or drop-in sink, countertop fabricators finishing a solid surface installation, and woodworking shops setting up a Karran sink all work through the same routing step at the sink opening. This bit is sized and angled for that exact operation. It is an indoor countertop tool, suited to the shop or the finished interior, not a general-purpose router bit for structural or exterior applications.
A postform laminate countertop uses a beveled profile at transitions and openings so the laminate edge is supported and the joint reads as finished. The 15-degree bevel matches that standard profile at the sink cutout.
The SAP description confirms the bearing is included with the bit as supplied.
It is rated for high-pressure laminate (HPL) and solid surface countertop materials, which are the two primary countertop types in postform sink installations.
The 1/4-inch shank fits both trim routers and any full-size router with a collet or adapter that accepts a 1/4-inch shank.
For installers and fabricators who need a consistent, bearing-guided 15-degree bevel at the sink cutout, this bit delivers the correct angle in a 1/4-inch shank format that works with the tools already on the job.
Sold In: 1 Each