Berenson Tempo Series 17-5/8" (448 mm) Center to Center Brushed Nickel Pull, - 1130-2BPN-P

Tempo Series Brushed Nickel Pull For Cabinets

Tempo Series brushed nickel pull from Berenson Corporation is a steel cabinet handle designed around a 448 mm center to center drilling pattern, which lets installers span wide drawer or door fronts with a single continuous pull point. The 20 inch overall length provides a long gripping surface, helpful on larger cabinet doors in kitchens, baths, or built-ins where more hand contact feels secure. A 1-1/4 inch projection holds the pull comfortably off the face of the cabinet, giving fingers room behind the handle without pushing the hardware too far into walkways. The 1/2 inch width balances a slim look with enough surface for a solid grasp, making repeated opening and closing feel controlled. A classic brushed nickel finish keeps reflections muted, which helps this transitional style pull sit comfortably with a range of decorative hardware and molding choices on the same run.

Key Tempo Pull Details For Everyday Use

• The 448 mm center to center mounting dimension sets a precise hole spacing that speeds layout on wide drawers and doors and supports consistent alignment across multiple cabinet fronts.
• The 20 inch overall length gives this handle visual presence on tall doors while providing extended grip area, which is useful when opening heavier or full-height cabinet sections.
• The 1-1/4 inch projection creates working space behind the pull, improving finger clearance and reducing knuckle contact with the cabinet face during regular use.
• The 1/2 inch width keeps the profile streamlined while still offering enough surface for a stable grip, which helps when pulling against loaded drawers or tight seals.
• The 25/32 inch hand clearance dimension describes the usable space behind the handle, guiding cabinet designers who are matching pulls to door overlays and face frame depths.
• The brushed nickel finish delivers a subdued sheen that coordinates easily with other brushed metal fixtures, simplifying visual alignment across hinges, faucets, and lighting.

Mounting Dimensions And Fit For Tempo Pull

This Berenson Tempo Series pull is defined by its 448 mm center to center hole spacing, giving installers a clear drilling reference when laying out cabinet fronts. The 3/8 inch base diameter describes the footprint at each mounting point, which helps when planning edge distances so the bases land fully on stiles or rails. A projection of 1-1/4 inches and hand clearance of 25/32 inch work together, giving planners concrete numbers to use when checking door swing paths and adjacent clearances in tight runs. The 20 inch overall length lets designers align the pull proportionally with taller drawer faces, so the hardware lines track cleanly across banks of cabinets in a kitchen, bath, or shop layout.

Using This Tempo Series Pull In Cabinet Runs

Where The 448mm Tempo Pull Works Best

The Berenson Tempo Series brushed nickel pull, with its 448 mm center to center dimension, fits applications where wide drawer fronts or tall doors need a single continuous handle point instead of multiple smaller pulls. The 20 inch length pairs well with base cabinets or pantry doors that benefit from a long vertical or horizontal grip, giving users a predictable hand placement every time they reach. A hand clearance of 25/32 inch behind the pull supplies space for fingers even on thicker door constructions, helping the pull perform consistently across different cabinet builds. The transitional style designation positions this handle between traditional and contemporary looks, so it adapts to existing decorative hardware and moldings without forcing a complete redesign of the surrounding components.

Why These Tempo Pull Details Support Consistent Results

The 448 mm center to center measurement on this steel pull standardizes drilling across a project, which reduces layout variation when multiple installers work on the same job or when cabinets come from different shops. The 3/8 inch base diameter provides a predictable land area around each fastener point, supporting repeatable alignment when hardware is referenced off stiles, rails, or panel edges. A projection of 1-1/4 inches and 1/2 inch width combine to define how far the hardware stands off and how it feels in the hand, so specifiers can match this pull to user preferences for grip depth and profile. The brushed nickel finish on steel creates a familiar visual and tactile surface that coordinates with other Berenson decorative hardware and molding choices, helping projects maintain a unified appearance from cabinet face to face.

Common Questions About The Tempo 448mm Pull

Choose The Tempo 448mm Pull For Coordinated Runs

The Berenson Tempo Series brushed nickel pull brings a 448 mm center to center dimension, 20 inch overall length, and 1-1/4 inch projection together in one steel handle, giving cabinet projects consistent hole spacing, predictable grip feel, and a transitional brushed nickel look. For runs of wide drawers or tall doors where a single elongated pull matches the design plan, this 1130-2BPN-P model from Wurth Baer Supply aligns drilling, hand clearance, and visual scale across the job.