Berenson Swagger Series 3-3/4" (96 mm) Center to Center Polished Chrome Pull, - 2388-1026-P

Berenson Swagger Series 96 Mm Pull For Cabinets

Berenson Swagger Series 96 mm pull defines a contemporary cabinet handle that uses a 96 mm center to center bore spacing, so it aligns with standard drill patterns on many modern cabinets and drawers. The pull is made from zinc, which provides a solid metal construction that supports everyday use on frequently opened fronts. Its polished chrome finish gives a bright, reflective surface that coordinates with other chrome decorative hardware on the job. The length or diameter of 4-3/16 inches sets the overall span of the pull, creating a proportion suited to many cabinet and drawer widths. A projection of 1-1/4 inches spaces the grip off the face, giving fingers room to wrap around the handle. Width of 5/8 inch keeps the pull visually streamlined while still offering a defined gripping surface along the front.

Key Swagger Series Pull Details For Projects

• The 96 mm center to center dimension establishes the mounting hole spacing, which helps match this pull to cabinet and drawer fronts laid out on a 96 mm pattern.
• The polished chrome finish creates a consistent bright appearance across installations, which supports a unified look when multiple pulls are installed in a kitchen or bath.
• Zinc construction provides a metal body for the pull, which supports repeated opening and closing of doors and drawers in residential or light commercial spaces.
• The 4-3/16 inch length defines the overall footprint on the cabinet front, which helps plan visual balance on doors and drawers of different sizes.
• The 1-1/4 inch projection sets how far the pull stands off the surface, which provides finger clearance without bringing the handle excessively far into the walkway.
• The 5/8 inch width shapes a narrow front profile, which offers a clean contemporary line while still presenting a firm edge for gripping.

Installation Dimensions And Hand Clearance Details

The 96 mm center to center measurement specifies the distance between mounting points, which allows straightforward drilling or reuse of an existing 96 mm layout during installation. A base diameter of 1/2 inch defines the size of each foot at the cabinet surface, which helps cover the immediate area around the mounting holes. Hand clearance of 15/16 inch describes the usable space between the back of the pull and the cabinet face, so installers can anticipate how comfortably fingers will fit behind the handle. The projection of 1-1/4 inches, working with this hand clearance, sets the stand-off geometry, which supports a practical grip for doors and drawer fronts that see constant traffic.

Using This Polished Chrome Pull In Real Jobs

Where This Contemporary Zinc Pull Fits Best

This Swagger Series pull is identified as contemporary style, which suits modern cabinet lines and straight-edged door and drawer designs. The polished chrome finish pairs with chrome faucets and hinges, helping create visual continuity across kitchens, baths, and other casework. With a length of 4-3/16 inches and 96 mm center to center spacing, the pull works with many mid-size cabinet doors and drawers, allowing a consistent handle size across a bank of fronts. Zinc material gives the pull a metal feel appropriate for decorative hardware and moldings projects, aligning with other metal components often specified in the same space. The 5/8 inch width keeps the profile slim, which aligns with clean-lined installations that favor minimal projection on the face plane.

Details That Support Repeatable Mounting Results

The 96 mm center to center dimension provides a clear layout reference, which supports repeatable drilling when installing multiple pulls in a straight run. A base diameter of 1/2 inch defines the footprint at each contact point, giving predictable coverage over the drilled holes and contributing to a neat interface between pull and door surface. Projection of 1-1/4 inches and hand clearance of 15/16 inch work together to set a known gripping envelope, which helps maintain a consistent user feel from one cabinet front to the next. The width of 5/8 inch keeps the gripping edge uniform along the handle, so installers can line up several pulls with the same slim appearance. The polished chrome finish, applied over the zinc body, establishes a single reflective tone, which supports uniform results when the pull is repeated across a full room of cabinets.

Common Questions About This Swagger Series Pull

Select This Pull For 96 Mm Chrome Cabinet Runs

This Swagger Series 96 mm center to center polished chrome pull from Berenson Corporation offers a contemporary zinc handle sized at 4-3/16 inches long with a 5/8 inch width. The 1-1/4 inch projection, 15/16 inch hand clearance, and 1/2 inch base diameter give defined mounting and gripping dimensions for cabinet and drawer fronts. For projects calling for polished chrome decorative hardware and moldings, this pull provides a consistent geometry and finish to repeat across multiple doors and drawers.